Cover of The Railway Locomotive, a book by Ketineni RamaraoFrom the book The Railway Locomotive
Chapters 14, 15, 30 and 31. Read the full book free as a PDF.

The boiler: a barrel of fire and water

Start at the boiler and the firebox at its rear, where the fire lives. The locomotive boiler is a pressure vessel in two parts. An outer steel barrel holds the water. At the back, an inner firebox, surrounded by water on all sides, holds the fire itself, braced against crushing pressure by hundreds of stays - the boiler's skeleton and, when they cracked, its weakness. Running forward through the water space is a forest of tubes that carry the fire's hot gases to the smokebox at the front. Heating surface is everything: the more intimately the hot gas touches the water, the more steam a shovelful of coal raises. Rocket's decisive feature at Rainhill in 1829 was exactly this - twenty-five copper fire-tubes multiplying the heating surface many times over, and the multi-tubular boiler became the standard in steam locomotives that followed.

Cross-section diagram of a steam locomotive: firebox and stays at the rear, fire-tubes running through the water-filled barrel to the smokebox, steam passing to the cylinders, exhaust blast up the chimney, and driving wheels linked by coupling rods.
One machine, one loop: fire boils water, steam drives the piston, and the exhaust blast stokes the fire. Original IOI diagram.

Steam into motion

Steam collected above the water passes to the cylinders - one on each side of the engine, usually low at the front. A sliding valve admits the high-pressure steam alternately to each face of the piston, driving it back and forth; the piston rod, crosshead and connecting rod convert that straight-line push into rotation at the driving wheels, exactly as a cyclist's leg drives a crank. Because a locomotive is too heavy for any one wheelset's grip, the driving wheels are linked by coupling rods, which share the power between the driving axles, and the weight resting on those driving wheels is what gives them grip. Adhesion - the friction of steel wheel on steel rail - is the whole trick of railway traction, proven as early as 1813 by Hedley's tests at Wylam: smooth wheels grip, with no need for racks or cogs, as long as enough weight rides on them.

The draught in the chimney

The steam locomotive's most elegant idea is its exhaust. Spent steam from the cylinders is blasted up the chimney through a narrow nozzle, and each blast drags the fire's gases through the boiler tubes faster, making the fire burn harder precisely when the engine works hardest. The engine, in effect, stokes itself. The characteristic chuff of a working steam engine is that blast, and the harder the engine pulls, the harder the fire roars - a self-regulating feedback loop. The draught is not free power, though: the exhaust adds back pressure on the pistons, which costs the engine some efficiency.

The diet and the trades

A hard-worked steam engine drank astonishingly - a goods engine might pass a water column every twenty or thirty miles - so the tender, a wagon of coal and water coupled permanently behind, became half the machine, and railway geography grew around the locomotive's thirst: water cranes, pumping stations, coal stages and engine sheds. The boiler itself was the most demanding mass-produced object of its century: plates rolled and flanged, thousands of holes drilled and reamed, red-hot rivets driven so they shrank tight as they cooled, hundreds of tubes expanded into their plates so not one wept under pressure. The boilermaker's hammer, rung along each stay to catch the dead sound of a crack, was the industry's safety system - and welding, arriving only in the 1930s and 1940s, erased a craft that today's preservation movement struggles to keep alive.

Two refinements turned a good machine into a great one. The first was superheating: steam collected from the boiler was passed back through larger flues in the fire-gas flow, raising its temperature far above boiling point, so that hotter, drier steam did more work per pound and no longer condensed wastefully in the cylinders. The second was the discipline of boiler care. The water a locomotive drank carried minerals that scaled the heating surfaces and attacked the plates, so engines came off the road every few weeks for washout, and every stay was rung one by one with the inspector's hammer. A boiler was a bomb tamed by inspection: a failed stay, a low water level and an exposed crown sheet formed the classic chain to an explosion, and the industry's safety record was written in its inspection regime.

Matching machine to train

Design was the art of matching the machine to the work. Express engines grew enormous driving wheels - six, seven, eight feet - because a bigger wheel covers more ground per piston stroke; goods engines traded diameter for coupled axles and pull; the mixed-traffic engine compromised between the poles. A 1930s yardmaster could read his railway's purposes from the engines in the shed; the modern diesel and electric, with flat power curves and multiple-unit flexibility, collapsed the whole taxonomy into one versatile machine re-geared. Mallard's 126 miles an hour in 1938, logged by a dynamometer car, stands as the certified summit of the express engine - and the Union Pacific's 4-8-8-4 Big Boys, among the largest steam locomotives ever built, as the summit of pull.

Quick answers

What is the fire-tube boiler?

A boiler in which the fire's hot gases travel through dozens of small tubes surrounded by water, enormously increasing the heating surface. Stephenson's Rocket helped establish the multitubular locomotive boiler in 1829, and it became the pattern for the steam locomotives built afterwards.

How does a steam engine grip smooth rails?

By weight and friction. Hedley proved at Wylam in 1813 that a smooth iron wheel on a smooth iron rail hauls by adhesion alone; coupling the driving wheels together shares the power between the driving axles, and the weight resting on those wheels is what gives grip.

Why is the exhaust steam sent up the chimney?

Each blast of spent steam drags the fire's gases through the boiler tubes faster, making the fire burn harder exactly when the engine works hardest - the steam locomotive's most useful side effect: the exhaust that creates the draught is steam already used in the cylinders, put to a second use, though the draught is not free power: it adds back pressure that costs the engine some efficiency.

Sources

Boiler construction and running gear follow the book's cited references on locomotive boilers and the Rainhill record; Mallard and Big Boy figures from the National Railway Museum, Guinness World Records and Union Pacific.

More from this book

Invention · From the book The Railway Locomotive

Who invented the railway locomotive?

Ask who invented the railway locomotive and the answer that comes back is usually George Stephenson.

Chronology · From the book The Railway Locomotive

The history of the railway locomotive

In 1804 a locomotive hauled ten tons of iron nine and a half miles and cracked the road beneath it.

Economics · From the book The Railway Locomotive

Why did diesel locomotives replace steam?

Within about a decade of 1948, the Class I railroads of the United States had replaced nearly all of their steam locomotives with diesels.