Cover of The Shipping Container, a book by Ketineni RamaraoFrom the book The Shipping Container
Part One and Part Two. Read the full book free as a PDF.

The trucker at the pier

Malcom Purcell McLean was born in 1913 in Maxton, North Carolina, and built a trucking fortune from a filling-station job: thirty trucks by 1940, one of the largest haulers in the American South by the 1950s, and third in after-tax profits among all American trucking firms by 1954. The memory that drove him dated to 1937: delivering cotton bales to the Hoboken piers and sitting all day watching longshoremen carry his cargo aboard one bale at a time. Historians suspect the scene gained polish in the retelling, but the arithmetic behind it was real. For the SS Warrior's 1954 voyage from the United States to Germany, Marc Levinson reports that loading and unloading accounted for more than one-third of the total cost of the voyage.

Aerial view of the Port Newark-Elizabeth Marine Terminal: rows of gantry cranes and stacked containers along the Newark Bay waterfront.
Port Newark-Elizabeth on Newark Bay, where the Ideal X loaded its fifty-eight boxes in April 1956 - the berth where containerisation began. Photo: Ken Lund, CC BY-SA 2.0, via Wikimedia Commons.

McLean's response was to become the competition. Worried that subsidised coastal steamship lines would eat his long-haul freight, he bought one - Pan-Atlantic Steamship, in early 1955 - and when the Interstate Commerce Commission ruled a trucking company could not own a ship line, he sold out of trucking altogether. His scheme went through the obvious refinement: not driving whole trailers onto ships, as others had done since the 1920s, but separating the box from its wheels and stacking the bare boxes like blocks. He ordered aluminium trailer bodies, thirty-five feet long, from Brown Trailer of Toledo - and carried off something worth more than the boxes: Brown's vice-president of engineering, Keith Tantlinger.

The founding voyage

On the rainy Thursday of 26 April 1956, a converted war-surplus T-2 tanker renamed Ideal X lay at Port Newark, New Jersey, while a crane swung fifty-eight silvery trailer bodies aboard, one every seven minutes. About a week later she reached Houston, where fifty-eight trucks were waiting, and the boxes went straight to their consignees without a single item inside being handled at the docks. When the accountants ran the voyage they produced the founding statistic of a new industry: loading the Ideal X had cost 15.8 cents per ton, against the $5.83 per ton that conventional loading then cost. A thirty-seven-fold difference, at exactly the point where the trade's costs had always concentrated.

The qualifiers matter. The military had shipped small steel CONEX boxes since Korea; Seatrain had hoisted whole railcars onto ships since 1929; in 1955 the White Pass and Yukon Route had put a small purpose-built container vessel on the Vancouver-Skagway run. What nobody had done was build an entire transport business - ships, terminals, cranes, trucks, pricing - around the box as its unit. The Ideal X was not the first container ship. It was the first proof the container could pay.

Two of McLean's trucking habits made the system commercial rather than merely mechanical. The first was regulatory mastery: he had built his fleet inside the ICC's cost-accounting game, proving his costs were lower than rivals' to win routes at half the going price, and he brought the same precision to ship economics. The second was the through price. McLean's people did not sell shippers a boat; they sold a door-to-door movement - the manufacturer loaded and sealed the box at his own dock and next saw it opened at the consignee's warehouse, with Sea-Land arranging the truck at each end and quoting a single rate. That was a genuinely new commercial object in American transport, where rail, truck and ship rates were separately filed and separately argued over. The container made the through movement physically trivial; McLean's sales organisation made it commercially simple. He cared about the math, an associate said, more than the romance of it. The math was romantic enough.

The engineer who made it a system

McLean supplied the insight and the nerve; Tantlinger supplied the thousand answers that made it machinery. He designed the corner fitting - the steel casting at each of a box's eight corners that every crane, twistlock, chassis and railcar grips - the twistlock itself, and the cellular ship hold that lets a crane drop a box into a vertical steel guide with no further lashing. Nobody knew whether a stack of boxes would survive heavy weather, so he packed modelling clay into the cell corners on a trial voyage and read the crushed impressions when the ship came home. On 4 October 1957 the converted Gateway City sailed with 226 containers, nearly four times the Ideal X's load, and two cranes could unload her in under eight hours. When McLean's corner-fitting patents threatened to fragment the young industry into incompatible private systems, Tantlinger argued for relinquishing them, and McLean accepted - the single most consequential act of technical generosity in the history of freight. The historian Marc Levinson's verdict stands: modern container shipping at its present scale would not have been possible without Tantlinger's innovations.

Quick answers

Did Malcom McLean invent the shipping container?

He invented the container shipping business. Boxes had gone to sea before 1956, but McLean was the first to build an entire system - ships, terminals, cranes, trucks and pricing - around the box, and his Ideal X voyage of 26 April 1956 proved it could pay.

What did Keith Tantlinger invent?

The hardware of the system: the corner casting every crane and chassis grips, the twistlock, and the cellular containership hold. He also argued for releasing the corner-fitting patents for industry-wide use, which made a single world standard possible.

How much did the first container voyage save?

Loading the Ideal X cost 15.8 cents per ton against $5.83 per ton for conventional loading in 1956 - a thirty-seven-fold saving at the pier, the point where the old system's costs had concentrated.

Sources

Voyage and loading figures follow the Port Authority of NY & NJ and Levinson's accounts (the Houston transit is reported variously as five or six days; the book writes "about a week"). McLean biography from the Richmond Fed's economic history.

More from this book

Mechanics · From the book The Shipping Container

How does the shipping container work?

A shipping container is boring by design - a welded steel frame with corrugated walls, no moving parts, nothing to power.

Chronology · From the book The Shipping Container

The history of the shipping container

In April 1956 a converted tanker carried fifty-eight trailer bodies from Newark to Houston and cut the cost of loading a ship thirty-seven-fold.

Business · From the book The Shipping Container

The business of the shipping container

Container shipping is a strange business: it sells a product as close to a commodity as any service can be - a slot for a standard box between two ports - on fleets worth billions, at margins that swing from famine to bonanza.