Cover of The Lithium-ion Battery: Ion, Cell, Charge, a book by Ketineni RamaraoFrom the book The Lithium-ion Battery: Ion, Cell, Charge
Chapter 8. Read the full book free as a PDF.

What is inside

Open a charged cell, which you should never do, and you find two sheets. In a common design the cathode is a thin aluminium foil coated with a lithium metal oxide such as lithium cobalt oxide or one of its descendants, and the anode is a copper foil coated with graphite. Between them is a porous plastic film soaked in an organic liquid electrolyte. The film is the separator. That is the whole machine.

Diagram of a lithium-ion cell: a cathode on the left and an anode (graphite in the common design) on the right with a separator between, lithium ions moving to the anode on charge and back on discharge, electrons travelling round the outside circuit.
How lithium ions rock between the electrodes. Original IOI diagram.

Charge and discharge

Charging pushes lithium ions out of the cathode, through the electrolyte, and into the layers of the graphite. Discharging lets them move back. The separator lets ions through but blocks electrons, so the electrons must go round the outside circuit. That outside current is what the device uses. The Royal Swedish Academy of Sciences describes the same idea: lithium ions flow between the electrodes inside the cell while electrons flow through the external circuit.

The book calls this the rocking-chair battery. Neither electrode is consumed. The ion rocks.

Hosts, not fuel

In a lead-acid battery the electrodes themselves take part in the reaction and are chemically changed as it charges and discharges. Lead and lead dioxide are chemically changed into lead sulphate each cycle, and the electrodes swell and crumble. In a typical lithium-ion cell the electrodes are hosts. The oxide layers and the graphite stay in place while lithium ions check in and out, though real cells still age. Whittingham's intercalation work, the first step in the history of the battery, is this idea. It is why a good cell survives thousands of cycles.

The Nobel committee's background document lists what a good host needs: an open structure with room for the ion, little structural change as it fills and empties, fast movement of the ion, reversibility, electrical conductivity, and no reaction with the electrolyte. No material is best on every count, which is why several cathode families coexist.

Why the voltage matters

The cathode sets how hard the cell pulls. The Nobel summary says Goodenough's lithium cobalt oxide doubled the battery's potential in 1980. Higher voltage means more energy for the same current, and it is why one lithium-ion cell can replace several older cells in a device. The same high voltage requires an organic electrolyte, because water-based electrolytes break down at these voltages. That electrolyte burns, which is the trade-off covered in why lithium-ion batteries catch fire.

What a host material has to do

The Nobel committee lists seven requirements for an intercalation electrode. It needs an electronic structure that gives a steady voltage across the whole range of filling. It must take in the ion with little change in structure. The ion must move through it fast. The reaction must be reversible. It must conduct electrons. It must not dissolve in the electrolyte or let solvent molecules in with the ion. And it must work near room temperature. Lithium cobalt oxide and graphite were the pair that met enough of them to make the first commercial cell.

The film that makes graphite work

The graphite anode is held at a voltage where the electrolyte would normally react with it. In a working cell, a thin layer forms on the first charges and stops the reaction. This is the solid electrolyte interphase. EPRI describes it as a passive stabilising layer that forms over the anode because the anode and electrolyte are electrochemically incompatible. The Nobel committee credits the use of ethylene carbonate in the solvent with letting that film form well enough to protect graphite from flaking. The film is also the first thing to break down when a cell overheats, which links the way a cell works to the way it fails (see why lithium-ion batteries catch fire).

What changed from the first cell

The first 1991 cell stored about 80 watt-hours per kilogram. By adopting graphite and charging to 4.2 volts, cells reached about 400 watt-hours per litre, according to the Nobel committee. Nothing in the principle changed. The ion still moves from one host to the other. What improved was the choice of hosts, the electrolyte and the film between them.

What the pack adds

A pack of cells also carries a battery-management system that monitors the voltage of cells or groups of cells and the temperature of the pack. It stops charging when cells are full and cuts off if something goes wrong. The cell chemistry makes the energy; the electronics around it keep the cell inside its safe window.

Quick answers

How does a lithium-ion battery work?

In a common graphite-anode cell, lithium ions move through an electrolyte from the cathode to the anode when charging and back when discharging. Electrons cannot cross the separator, so they travel round the outside circuit and power the device.

Why is it called a rocking-chair battery?

Because the lithium ions rock back and forth between the two electrodes, which stay in place, rather than the electrodes being consumed.

Is there lithium metal inside a lithium-ion battery?

No. The lithium is stored as ions in the cathode and anode materials. Early lithium-metal cells were dangerous because lithium whiskers grew on the metal electrode.

Sources

The flow of ions inside the cell and electrons outside, and the doubling of voltage by lithium cobalt oxide, are from the Nobel Prize popular information. The foil materials, the hosts-not-fuel comparison with lead-acid, the list of host requirements and the "rocking-chair" name follow Chapter 8 of the book. The statement that water-based electrolytes break down at these voltages and the description of battery-management systems are standard battery-engineering facts stated without figures and are not linked to a specific source here. The seven host requirements and the ethylene carbonate film are from the Nobel scientific background document; the film's role and breakdown are from EPRI.

More from this book

History · From the book The Lithium-ion Battery: Ion, Cell, Charge

Who invented the lithium-ion battery? Whittingham, Goodenough, Yoshino and Sony

No single person invented the lithium-ion battery.

Safety · From the book The Lithium-ion Battery: Ion, Cell, Charge

Why lithium-ion batteries catch fire: thermal runaway explained

A lithium-ion cell stores energy in a flammable liquid next to cathode materials that can release oxygen when hot.

Supply chain · From the book The Lithium-ion Battery: Ion, Cell, Charge

Where does lithium for batteries come from? Mines, brines and the cobalt question

Lithium is not rare in the ground.

Chemistry and cost · From the book The Lithium-ion Battery: Ion, Cell, Charge

LFP vs NMC batteries: why the cheaper chemistry is winning

For most of the 2010s, lithium iron phosphate lost to denser chemistries.