Explainer · Health Care · Health Care Equipment and Supplies
How an X-ray tube works, from Coolidge to today
Most conventional medical X-ray systems rest on one device: an evacuated tube, usually glass but sometimes with a metal envelope, where electrons are boiled off a filament, accelerated and stopped at a target. William Coolidge's 1913 version let doctors control the beam for the first time.
From the book The X-ray MachineChapters 17 to 20. Read the full book free as a PDF.
The gas tube problem
Röntgen's tubes were gas-discharge tubes. His paper describes passing a discharge from an induction coil through a Hittorf vacuum tube or a well-exhausted Crookes' or Lenard's tube. The Museum of Radiation and Radioactivity at Oak Ridge Associated Universities says the Coolidge tube did not replace cold-cathode tubes at once: they were manufactured into the 1920s, saw routine use into the 1930s, and there were instances of their use in radiology as late as the 1960s.
Coolidge's change
William David Coolidge, an American physicist at General Electric, introduced a hot-cathode X-ray tube in 1913, according to the Smithsonian. ORAU calls its invention "the single most important event in the progress of radiology". Its defining features are a high vacuum, so little gas that it takes no part in making X-rays, and a heated filament as the source of electrons.

How it makes X-rays
When the cathode filament is heated it emits electrons, and the hotter it gets the more it emits. A high voltage between the cathode and the positively charged anode accelerates the electrons. When they hit the anode they change direction and emit bremsstrahlung, X-rays with a continuous range of energies, and the maximum energy of those X-rays equals the kinetic energy of the electrons. ORAU adds that stray radiation is also produced when electrons hit other tube components.
Two controls, not one
ORAU says the key advantages are stability and that the intensity and energy of the X-rays can be controlled independently. More filament current raises the filament temperature, which means more electrons and a more intense beam. More voltage means faster electrons and more energetic X-rays. A doctor could now choose both, which the gas tube had not allowed.
Tungsten and heat
Tungsten is the most common target material because it has a high atomic number, which increases X-ray intensity, and a melting point high enough that it can be allowed to become white hot. The target may reach 2,700 degrees Celsius in operation, ORAU says, and is often surrounded by copper, whose high heat capacity helps dissipate heat. Radiopaedia states that in a typical diagnostic tube only about 1 per cent of the electron energy becomes radiation and about 99 per cent becomes heat, which it calls the undesirable product; the split depends on the tube voltage. Some cracking and pitting of the focal spot is normal, and a tungsten-rhenium alloy has been used to reduce both, ORAU notes.
Why the bulb is large
The bulb of a Coolidge tube is large to increase the surface through which heat radiates, which limits the glass temperature. Its size also reduces the amount of tungsten that can be deposited per unit area, and it keeps the glass away from the strongest part of the electric field. If the tube has another way of losing heat, the bulb can be smaller.

The focal spot
The filament sits in a cylindrical slot in the cathode, and the focal spot on the anode is similar in size and shape to that slot. Moving the filament deeper into the slot shrinks the focal spot, and moving it closer to the top enlarges it. Radiopaedia lists the working parts of a modern tube: the filament that boils off electrons, the target, and an anode rotor with an induction stator. The diagram above shows these parts labelled.
Where it leads
For what the beam then does, see how X-ray machines work. For the tube's earliest history, see the history of the X-ray machine.
Quick answers
What did Coolidge change about the X-ray tube?
In 1913 he introduced a high-vacuum tube with a heated filament as the source of electrons. This made the beam stable and let intensity and energy be controlled separately.
Why is tungsten used in X-ray tubes?
It has a high atomic number, which raises X-ray intensity, and a high enough melting point to run white hot.
How much of the energy becomes X-rays?
In a typical diagnostic tube, Radiopaedia puts it at about 1 per cent, with about 99 per cent becoming heat; the split depends on the tube voltage.
