Cover of Beer: Field, Kettle, Glass, a book by Ketineni RamaraoFrom the book Beer: Field, Kettle, Glass
Chapters 7, 7B, 15B and 41. Read the full book free as a PDF.
Diagram of the six steps of brewing: malt, mash, lauter, boil, ferment, and mature and pack, with spent grain going to cattle feed.
The brewing sequence. Original IOI diagram.

Step 1: malting, or deceiving the grain

Brewing starts before the brewery. Barley is soaked so the seed believes spring has come, and it begins to germinate. Inside the grain, enzymes multiply, above all the amylases, whose job is to cut the seed's starch reserves into sugars for the young plant. The maltster lets this go just far enough, then stops it with hot air in a kiln. Pale kilning makes lager malt; harder kilning makes the darker, toastier malts that colour porter and stout. Malt is brewing's universal raw material: shelf-stable grain sugar with its own cutting tools built in.

Step 2: mashing, the enzyme reactor

At the brewery the malt is milled and mixed with hot water in the mash tun. This is controlled biochemistry, and temperature is the steering wheel. Barley malt starches gelatinise between 61 and 65 degrees Celsius, and the mash is held in that range so the enzymes can work. Lower rests favour beta-amylase, which clips fermentable sugars and gives a dry beer; higher rests favour alpha-amylase, which leaves dextrins behind and gives body. A typical saccharification rest lasts 30 to 60 minutes. The result is wort, a sweet liquid still hours away from being beer.

The enzyme industry inside the mash

Once the mash tun was understood as an enzyme reactor, enzymes became a product. Industrial microbiology, itself a descendant of brewing science, learned to mass-produce amylases and their relatives from fermentation of Aspergillus and Bacillus strains, and brewing bought in: added enzymes let brewers convert raw grain and adjuncts, speed filtration, prevent chill haze and shorten the diacetyl rest. The suppliers are the fermentation-technology giants, for whom brewing is a showcase market.

Step 3: lautering

The wort is then separated from the grain. Barley was chosen by brewers partly because its husk stays attached and forms a natural filter bed: the grain itself does the straining as hot water rinses the sugars through. The spent grain left behind is not waste. Most of it goes to cattle feed, one of the oldest by-product contracts in food manufacturing.

Step 4: the boil, and the hop

The wort is boiled, usually for about an hour, and this is when hops enter. Hop cones carry alpha acids in their resin, and boiling isomerises them into iso-alpha acids: the clean bitterness that balances malt sweetness and, for most of brewing history, suppressed the bacteria that spoil beer. Bitterness is measured in International Bitterness Units, an industrial flavour scale that began as a literal chemical concentration, roughly milligrams of iso-alpha acid per litre.

Rows of tall stainless steel fermentation and maturation tanks with conical bottoms, connected by pipes in a modern brewery hall.
Fermentation and maturation tanks in the Tartu brewery, Estonia. The tall stainless cylinder with a conical bottom is the default vessel of modern brewing. Photo: WanderingTrad, CC BY-SA 4.0, via Wikimedia Commons.

Step 5: fermentation

The boiled wort is cooled hard and fast, and meets yeast. The headline reaction is simple: glucose becomes ethanol and carbon dioxide. The character is in the by-products: esters that read as banana or pear, higher alcohols, and diacetyl, a butter-flavoured compound that young beer makes and then, given a rest, reabsorbs. Ale yeasts work warm, near the top of the vessel; lager yeasts work cold and slow, near the bottom. That single microbial difference divides nearly every beer in the world into its two great families.

Step 6: maturation and packaging

Young beer is rough. It rests so that flavour compounds settle, yeast drops out and carbonation develops; the cold storage that gives lager its name is exactly this rest. Then the beer is clarified, filtered or centrifuged, and packaged into keg, bottle or can. Oxygen is the enemy from here on, tracked in parts per billion, because oxygen is flavour's slow killer in the package.

The quality lab

Modern brewing is measured at every step, because beer was the first mass product valuable and perishable enough to make measurement pay. Alcohol is tracked by density, bitterness by spectrophotometer, colour on standard scales, and dissolved oxygen in parts per billion. Trained tasting panels decompose a sip into a standardised vocabulary: bitterness, sweetness, acidity, the roast spectrum of caramel, toffee, coffee and chocolate, the ester spectrum of banana, pear and apple, and the off-flavour list every quality lab hunts. The most famous off-flavour is photochemistry: ultraviolet light cracks iso-alpha acids into a fragment that recombines with sulphur into the same compound a skunk sprays, which is why beer lives in brown glass and cans.

What the process decides

Brewing is energy: kilning the malt, boiling the wort, cooling it again, refrigerating lager tanks. It is water too, since beer is more than 90 percent water and the brewery uses several litres more for every litre it sells. And it is time, because fermentation and maturation tie up tank capacity for days or weeks. The malt, hops and yeast in a glass cost less than most people guess; the plant, the heat, the cold and the package are where the money goes. For what each ingredient contributes, see what beer is made from.

Quick answers

What temperature is beer mashed at?

Brewers hold the mash in the low 60s Celsius. Barley starch gelatinises between 61 and 65 degrees, and rests in that range let the malt enzymes turn starch into sugar.

What is wort?

Wort is the sweet liquid rinsed from mashed grain before fermentation. Boiling with hops turns it into bitter, stable wort; yeast then turns it into beer.

How long does it take to brew beer?

The brew day itself is hours. Fermentation takes days, and maturation adds days for ales and weeks for cold-matured lagers.

Sources

The industrial-enzyme suppliers are from Chapter 7B of the book. The quality-lab instruments and the lightstruck reaction are from Chapter 7A of the book. Mash temperatures, the gelatinisation range and rest behaviour are from the Oxford Companion to Beer entry on saccharification. The IBU description follows its IBU entry, which records the historical correction factor behind the modern practical equivalence of about 1 mg of iso-alpha acid per litre. The ale and lager distinction follows Encyclopaedia Britannica. Boil length and diacetyl behaviour are from Chapter 7 of the book.

More from this book

Ingredients · From the book Beer: Field, Kettle, Glass

What beer is made from: water, malt, hops and yeast

Four ingredients are named in the Bavarian purity tradition: water, malt, hops, yeast.

Styles · From the book Beer: Field, Kettle, Glass

The main types of beer, explained

Most beer belongs to one of two great families, and the deciding vote belongs to a microbe.

History · From the book Beer: Field, Kettle, Glass

A history of beer, from Sumer to the golden lager

Beer is older than writing, and nearly older than cities.