Cover of The Television, a book by Ketineni RamaraoFrom the book The Television
Chapters 6 and 39. Read the full book free as a PDF.

The parts

A cathode-ray tube (CRT) is a sealed glass tube with the air removed. At the narrow end an electron gun releases electrons from a hot cathode. The anode is positive, so it attracts them, and a focusing anode squeezes the stream into a tight beam while an accelerating anode speeds it up. The beam crosses the vacuum and strikes the flat screen at the wide end, which is coated with phosphor, a material that glows when struck. A conductive coating inside the tube collects the electrons that arrive at the screen end.

Steering the beam

With nothing to steer it, the beam would hit a single dot in the centre of the screen. Magnetic deflection coils around the neck of the tube bend it so that it can reach any phosphor dot. Circuits drive the coils so that the beam sweeps left to right and steps down line by line, a pattern called a raster scan. In the US analogue system the gun drew 525 lines, odd lines first and then even lines, 60 times a second. The idea of scanning is explained in how television works.

Four boxes in a row showing the parts of a colour CRT in order: electron gun, deflection coils, shadow mask and phosphor screen, each with a one-line description.
How a colour CRT makes a picture. Original IOI diagram.

How colour gets onto the screen

A black-and-white screen has one phosphor that glows white. A colour screen has three phosphors, arranged as dots or stripes, that glow red, green and blue, and three electron beams to excite them. A mask with small holes, the shadow mask, sits a short distance behind the screen so that each beam can strike only its own colour of dot. The photograph below shows the mask's pattern at about 40 times magnification: the separate red, green and blue dots are only blended into one colour by your eye at normal distance.

Black image with a grid of small red, green and blue dots arranged in squares, with the dots overlapping where colours mix.
About 40 times magnification of the screen of a 15 inch CRT monitor, showing the shadow mask dot pattern while red, green and blue squares are displayed. Each colour is made of separate dots. Photo: Selcuk Oral (drumex), CC BY-SA 3.0, via Wikimedia Commons.

Where the shadow mask came from

Harold Law of RCA Laboratories recalled that the shadow-mask principle had already been invented when RCA started a concentrated colour-tube programme in late 1949. The first shadow-mask tube was made by settling phosphor dots through the holes of the mask itself, then moving the screen and settling through the holes again. Because the mask has to sit a distance from the phosphor plate for the beams to land correctly, a contact print of the dots would not work. Law's solution was to expose photographic film through the spaced mask and use the result to make a silk screen, printing the phosphor screen in a second step. It was slow work, but it let the dots line up with the holes.

Making it bright enough

Early picture tubes were dim. The kinescope that Zworykin's group at RCA developed was improved radically by covering the back of the phosphor screen with a thin aluminium coating. This allowed very high voltages and reflected light that would otherwise have been wasted, so tubes could be viewed in ordinary room light. Better phosphors helped too.

Why the tube lasted and why it went

The CRT's drawbacks, as Canon's science pages put it, are the high voltage needed to emit electrons and the large, heavy parts such as the electron gun. The scanning lines also need a certain distance between the gun and the screen to cover a large area, which limits how thin a CRT set can be. Flat panels removed that constraint, which is the story in how LCD and OLED TVs work.

Quick answers

How does a CRT TV work?

An electron gun fires a beam of electrons through a vacuum. Magnetic coils sweep the beam across the screen line by line, and the beam makes phosphor dots on the screen glow.

What does the shadow mask do?

It is a perforated metal sheet behind the screen that makes each of the three beams hit only its own colour of phosphor dots, red, green or blue.

Why were CRT TVs so deep?

The beam has to travel some distance from the gun to sweep across the screen, so a CRT can only be made so thin, according to Canon.

Go deeper in the book: The Television · PDF · Source Companion · Browse the category

Sources

Electron gun, anodes, phosphor, raster and the 525-line description are from HowStuffWorks and the Canon Science Lab page. The aluminium-backed kinescope is from the National Academy memoir. The shadow mask history is from the Harold Law oral history. The mask photograph details are from the Commons file description.

More from this book

History · From the book The Television

Who invented the television?

There is no single inventor of television, and anyone who gives one name is leaving out two others.

Explainer · From the book The Television

How television works

A television never shows a moving picture.

Explainer · From the book The Television

How LCD and OLED TVs work

A flat panel has no beam and no tube.

Explainer · From the book The Television

How smart TVs work

A smart TV is a television with a computer built in.