Explainer · Consumer Discretionary · Household Durables
How television works
A television never shows a moving picture. It shows a stream of still pictures, each built from tiny dots, and it relies on your brain to fill in the rest.
From the book The TelevisionChapters 4 to 10. Read the full book free as a PDF.
Two tricks of the brain
Television depends on two facts about vision. First, if a still image is divided into small coloured dots, the brain reassembles the dots into a meaningful picture. Second, if still images follow each other quickly enough, the brain sees motion. A TV screen exploits both, with dots called pixels and a stream of frames.
Turning a scene into a signal
A camera cannot send a whole picture at once. It breaks the picture into lines and sends the brightness along each line in order, as one changing signal. Zworykin's iconoscope camera tube did this with a mosaic of tiny photocells that stored charge as light fell on them. An electron beam scanned the mosaic, discharging each element in turn, and the discharge produced the video signal. The tube stored light across the whole frame, which is why it worked as a practical camera.
Drawing it again: the raster
The receiver does the reverse. In a cathode-ray tube set, a beam of electrons moves across a phosphor screen in a pattern called a raster. It paints one line from left to right, flies back to the left, steps down a little and paints the next, working from top to bottom. Magnetic coils steer the beam. How the tube itself does this is covered in how CRT TVs work.
Frames, fields and flicker
In the US analogue standard, a black-and-white picture had 525 lines and was shown at 30 frames a second. Not all 525 lines carried picture, because some were used for the flyback time, when the beam returns from the bottom of the screen to the top. To reduce flicker, engineers introduced interlace: each frame is split into two fields, the first with the odd lines (1, 3, 5) and the second with the even lines (2, 4, 6), so the screen is refreshed 60 times a second.
Other countries chose other numbers. The BBC's 1936 service used 405 lines. Today's high-definition standards use up to 1080 lines or more. The details changed. The principle of lines, frames and a signal that fills them stayed.
The colour fight
Colour came close to arriving in a form that would have stranded every set already sold. In September 1950 the FCC backed CBS's sequential system, which spun a mechanical red, green and blue disc in front of the picture tube and needed an adapter on existing receivers. RCA's simultaneous system, which scans all three colours at once and recombines them at the receiver, was judged not ready, and the FCC found its receivers bulky and its colour fidelity inadequate. RCA and NBC sued. David Sarnoff called the decision "scientifically unsound and against the public interest". An estimated 7 to 9 million sets were in use in 1950 and could not receive the CBS signal without an adapter. A court issued a temporary restraining order that stopped the CBS standard from taking effect in November 1950.
Colour added without breaking old sets
The standard that finally won was designed so that nothing already sold became obsolete. On 17 December 1953 the US Federal Communications Commission approved the transmission standards of the National Television System Committee for compatible colour television, and regular service began on 23 January 1954. The New York Times reported at the time that the colour signal could be received on existing sets in black and white. Compatibility mattered more than picture quality, because millions of viewers had already bought black-and-white sets.
Where the signal travels
Broadcast signals travel through the air from antennas and towers. Cable, satellite and, now, internet streaming carry the same picture by other routes, which is the subject of the later chapters of the book. The next question is what lies inside a modern set: how smart TVs work.
Quick answers
How does a TV create a picture?
The picture is split into lines of dots. A signal carries the brightness and colour of each dot in order, and the set paints the lines on the screen, frame after frame, quickly enough that the brain sees motion.
What is interlace?
Each frame is drawn as two fields: the odd lines first and then the even lines. In the US analogue standard that gave 60 fields a second from 30 frames.
How many lines did analogue TV have?
The US standard had 525 lines per frame and the BBC's 1936 electronic system had 405.
Sources
- HowStuffWorks, Marshall Brain, "How Television Works"
- The Broadcast Bridge, "Broadcast for IT, Part 4: NTSC Line and Frame Relationships" (30 Jan 2018)
- National Academy of Sciences, Biographical Memoirs vol. 88, "Vladimir Kosma Zworykin"
- National Archives, Prologue, "The Following Program . . ." (color television and the FCC, 1950)
- New York Times, "Compatible Color Approved for TV; F.C.C. Reverses Itself" (18 Dec 1953)
- SMPTE Journal, "U.S. Color Television Fundamentals: A Review" (1977)
- Federal Communications Commission, "The Technology of Television" (76 years of TV)
- BBC, "First regular hi-definition television service" (2 November 1936)
