Process · Materials · Construction Materials
How glass bottles are made
A bottle is a simple object that took four centuries to make cheap. The key step was a machine that could do the one thing only a human eye and hand had done before: gather the right amount of molten glass.
From the book Glass: Sand, Fire, LightChapters 20 and 23. Read the full book free as a PDF.
The hand shop
For most of history a bottle was gathered on a blowpipe, blown into a mould and finished by hand. It was slow, heavy, hot work, and it fed one of the great trades of the early modern world, which was wine.
English glassmakers, pushed off wood fuel, switched to coal in the seventeenth century. Coal burned hotter and produced a darker, stronger, thicker glass that could survive the pressure of maturing wine and the shock of sea freight. Together with the cork, it made the sealed, ageing bottle possible. After that, beer, mineral water, medicine, ink, pickles and perfume all moved into glass, because glass is inert: it gives the contents no taste and takes none.
The machine that changed it
By the late nineteenth century the supply of skilled labour had become the limit of the whole industry, and child workers in bottle works were a documented scandal. Michael J. Owens, who started in a glasshouse at the age of ten, built a machine that ended the problem. Financed by Edward Drummond Libbey in Toledo, Ohio, and finished in 1903 with a team of engineers, the Owens machine was the first commercially successful fully automatic bottle machine.

The hard part had always been gathering the glass. Owens used suction. A rod drew molten glass up into a mould to form the neck, and a burst of air then blew it out into its final shape. ASME later designated it a historic engineering landmark. The University of Toledo records that the National Child Labor Committee commended the machine in 1913 for ending child labour in the bottle works.
How a modern line works
- Gob. Molten glass leaves the furnace through a channel, the forehearth, where it is brought to an even temperature. A shear cuts it into measured lumps called gobs.
- Blank mould. Each gob drops down a chute into a first mould that forms the neck and a rough hollow shape called the parison.
- Blow mould. The parison moves to a second mould, where compressed air blows it out to the full bottle shape. A modern machine does this in many sections side by side, forming several bottles per section each cycle, hundreds a minute in total.
- Coating and annealing. The bottles are given a thin surface coating to resist scratches, then annealed in a lehr so that stress does not build up.
- Inspection. Cameras and gauges reject bottles with cracks, thin walls or bad necks. Rejects are crushed and returned to the furnace as cullet.

Colour and weight
Bottle glass is melted from the same soda-lime recipe as a window, with a little alumina, and coloured by small additions. According to the Glass Packaging Institute, amber, the most common colour, comes from iron, sulfur and carbon, and green from iron, often with chromium. Colour is partly a tool: amber glass absorbs nearly all light shorter than 450 nanometres, which protects beer and some medicines from ultraviolet.
The modern bottle is also much lighter than its ancestors. Less glass means less sand, soda ash, fuel and freight per bottle, which is why bottle weight is something manufacturers watch closely.
What the Owens machine left behind
Cheap bottles made mass-market preserved food, safe milk and standard medicine possible. They also built the disposable-package economy, and Toledo still calls itself the Glass City. Owens-Illinois, formed by merger in 1929, survives as O-I Glass, one of the largest container glass makers in the world. Every bottle machine today descends from that first idea: gather, form the neck, blow the body.
The step that follows the bottle is the one the industry now cares about most. See how glass is recycled.
Quick answers
Who invented the automatic glass bottle machine?
Michael J. Owens, working with engineers and financed by Edward Drummond Libbey, completed the first commercially successful fully automatic bottle machine in Toledo, Ohio, in 1903.
What is a gob in glassmaking?
A gob is a measured lump of molten glass cut from a stream and dropped into a mould.
Why are some bottles amber or green?
Iron, sulfur and carbon make amber, and iron with chromium makes green. Amber glass absorbs nearly all light shorter than 450 nanometres, which protects contents such as beer from ultraviolet.
