Engineering · Industrials · Construction and Engineering
How skyscrapers resist wind: Fazlur Khan, the tube and the Hancock Center braces
For a very tall building, the hard load is sideways wind, not weight. Fazlur Khan, the structural engineer at Skidmore, Owings and Merrill in Chicago, made the outer wall act as a hollow tube. At the John Hancock Center, he added giant diagonal braces so the walls worked as a stiff cantilever.
From the book The SkyscraperChapters 9 and 10. Read the full book free as a PDF.
Wind grows faster than height
A Princeton study of the Hancock Center says that the controlling factor in the design of multistorey buildings is usually the sideways load from wind. It describes Khan's "structural height premium": the extra material needed to resist lateral loads, over and above what gravity alone requires, which grows as a building gets taller. In a plain steel frame, you pay a rising price in steel for every extra floor.
The tube idea
According to Wikipedia, Khan, who was born in Dhaka in 1929 and joined SOM in Chicago in 1955, proposed using all the outer wall of a building to act like a thin-walled tube. It names framed, trussed and bundled tube variants. It says that tubes are stiff, use less material, and can be built in steel, reinforced concrete or a mix. That last claim is general-reference wording, not a measured count.
The Hancock Center: braces on the outside
The Princeton study says the Hancock Center is a 100-storey, 1,127-foot steel tower in Chicago by SOM, and was the tallest building in the world outside New York at the time. It gives the completion year as 1968 in the text and 1969 in a data line, so dates for this building vary by source.
The study says SOM's first calculations showed that a framed tube for this tower would take too much steel. Khan then proposed tying the exterior columns together with diagonals. It explains that, in a plain framed tube, only 30% of the sideways deflection comes from cantilever action and 70% from frame action, while the braced Hancock behaves much more like a true cantilever, much as in Khan's own analysis. The diagonals also spread the weight of the building more evenly across the columns.

Wind and the Burj
The Burj Khalifa's owner says its Y-shaped plan was used to shape the structural core, helps reduce wind forces, and that the structural system is a "buttressed core". Different shape, same problem: stiffness against wind.
Why this matters
A tube turns the outside of the building, which is already needed for windows and walls, into the structure. That is why Khan's work is tied to the economics of height as much as to engineering. For how the type started see the first skyscraper, and for how height is measured, how tall is the Burj Khalifa.
Quick answers
Who invented the tube structure for skyscrapers?
Fazlur Rahman Khan, a structural engineer at Skidmore, Owings and Merrill in Chicago, is credited with the tube systems, including the framed, trussed and bundled tube.
Why are there diagonal braces on the Hancock Center?
They tie the outer columns together so the walls act as a stiff tube, which resists wind with less steel than a plain framed tube would need, according to a Princeton study.
Is wind or weight the bigger design problem for a tall building?
For very tall buildings, sideways wind load usually controls the design, according to the Princeton study.
