Cover of The Sneaker: Rubber, Air, Foam, a book by Ketineni RamaraoFrom the book The Sneaker: Rubber, Air, Foam
Chapters 10 and 11. Read the full book free as a PDF.

The parts list is longer than you think

An MIT-led life-cycle study counted 65 discrete parts and more than 360 processing steps to assemble the single running shoe it analysed, from cutting and sewing to injection moulding, foaming and heating. An older reference text says a running shoe has "as many as 20 parts" if you count only the basic components. The gap is a question of what you count: the 20 are the named pieces of the upper and sole, and the 65 include every film, reinforcement and adhesive layer.

What the shoe is made of matters as much as how many pieces it has. NIKE's annual report names the principal footwear materials as natural and synthetic rubber, plastic compounds, foam cushioning, natural and synthetic leather, nylon, polyester and natural-fibre textiles, plus polyurethane films for its Air-Sole units. Most are petrochemicals. Natural rubber and leather are the farmed exceptions. The history of rubber in the sole is a story of its own.

A long, narrow brick factory room with two rows of workers seated at sewing machines under a wooden ceiling, photographed in sepia.
The stitching department of the Rex Shoe Factory, New Orleans, 1917. Cutting, stitching and bonding are still separate stations in a modern sneaker factory, only faster and more automated. Photo: Mr. Covert, for the New Orleans Chamber of Commerce, Public domain, via Wikimedia Commons.

Step 1: cutting

The factory begins with rolls of synthetic material and dyed leather. Die machines stamp out the shapes "in cookie cutter fashion", with markings that guide assembly. The pieces are bundled and labelled by size and style and sent to the stitching floor. Every size of every model needs its own set of dies, which is one reason shoe tooling is expensive to change.

Step 2: stitching the upper

The parts of the upper are stitched or cemented together and the lace holes punched. At this point the upper looks, in the reference text's description, like a round hat, with extra material around the edge called the lasting margin. The insole is stitched to the sides of the upper, stiffeners go in at the heel and toe, and an insole board is inserted.

Some uppers now skip most of this. NIKE describes its Flyknit as a digitally engineered knitting process, best known for lightweight, formfitting, virtually seamless uppers. A knitted upper replaces many cut and stitched parts with one machine-made piece. Public sources do not give a verified waste or yield figure for that change, so none is claimed here.

Step 3: lasting

A last is the plastic form that gives the shoe its shape. The upper is heated and fitted around it. An automatic lasting machine pulls the upper down, a nozzle applies cement between the upper and the insole board, and the machine presses them together. The word "cement" is literal: nails gave way to adhesive bonding in athletic shoes.

Step 4: attaching the sole

The sole has three layers. The insole is a thin layer of man-made ethylene vinyl acetate (EVA). The midsole provides the bulk of the cushioning and is usually polyurethane or EVA foam, sometimes around a gel or air unit. The outsole is the rubber that meets the ground. The pre-stamped midsole and outsole are layered and cemented to the upper, the bonded sole is reactivated over a heater, and the cement cools as the parts join.

Step 5: finishing and testing

The shoe is taken off the last, cleaned of excess cement and inspected. Test methods from SATRA, the footwear research body, check for poor lasting, incomplete cement bonding and stitching errors.

Five-step diagram of sneaker manufacturing: die-cut parts, stitch the upper, last the upper, cement on the sole, finish and test.
The five stations of a sneaker factory. Original IOI diagram.

Why the process shapes the industry

Two facts follow from the sequence. First, the work is labour-intensive, so it goes where skilled labour is available at a price the market will pay. Second, the stages are modular. Cutting, stitching, lasting and bonding are separate stations, so a company can contract out every one of them and keep only design and the parts it treats as core.

NIKE shows the pattern. In fiscal 2025 its contract manufacturers operated 97 finished-goods footwear factories in 11 countries, and its Air Manufacturing Innovation subsidiary, which makes Air-Sole components, has sites in Oregon, Missouri and Vietnam. The cushioning unit that defines the brand stays under company control. The shoe itself is made by others. Where those factories are is the next question, and what the energy-hungry stages do to the footprint is covered in the carbon footprint of a pair.

One limit on this account: the step-by-step description comes from a reference text written some years ago for a conventional running shoe. Modern plants use more injection-moulded midsoles, more automation and knitted uppers. This article does not claim first-hand factory data or a verified output figure.

Quick answers

How many parts are in a sneaker?

An MIT-led life-cycle study of a single running shoe counted 65 discrete parts and more than 360 processing steps. A reference text counts up to 20 for the basic named components.

What is a last in shoemaking?

A last is the plastic, foot-shaped form the upper is stretched and glued around so the shoe holds its shape. Each shoe size and style needs its own.

Are sneakers glued or sewn?

Both. The upper is stitched or cemented together, but the upper is attached to the sole with adhesive cement, which replaced nails in athletic shoes.

What are sneakers made from?

NIKE lists natural and synthetic rubber, plastic compounds, foam, leather and synthetic leather, nylon, polyester and natural-fibre textiles, and polyurethane film for air units. Most are petrochemical.

Sources

Step sequence from How Products Are Made (a dated reference for a conventional running shoe). Part and step counts from the MIT-led study as reported by MIT Technology Review. Factory counts and materials from the NIKE 10-K for fiscal 2025.

More from this book

History · From the book The Sneaker: Rubber, Air, Foam

Who invented the sneaker? Vulcanised rubber, croquet sandals and the plimsoll

Nobody invented the sneaker in one move.

Invention · From the book The Sneaker: Rubber, Air, Foam

How Nike Air cushioning works: gas, film and a foam shell

A running stride sends a force of more than four times body weight through the foot, about 1,500 times a mile.

Supply chain · From the book The Sneaker: Rubber, Air, Foam

Where sneakers are made: Vietnam, Indonesia, China and a handful of contractors

The big sneaker brands make almost no shoes themselves.

Impact · From the book The Sneaker: Rubber, Air, Foam

The carbon footprint of a pair of sneakers: why the factory, not the fabric, dominates

People assume the footprint of a shoe is in its materials.