Cover of The Hydroelectric Dam: Water, Concrete, Power, a book by Ketineni RamaraoFrom the book The Hydroelectric Dam: Water, Concrete, Power
Chapters 4 and 10-12. Read the full book free as a PDF.

The site chooses the problem

Hydropower begins with head and flow. Head is the elevation difference available to drive water; flow is the quantity passing through over time. DOE makes these the starting point for turbine selection, alongside setting depth, efficiency and cost. The machine follows the water conditions rather than a universal preference for one shape.

A project is buying a way to convert a particular resource into shaft rotation. Its runner, the rotating part receiving the water, has to suit both the energy available and the volume passing through. The surrounding waterway is part of the choice. A runner cannot be selected as though the river were a standard fuel supply.

Impulse: make a jet do the work

An impulse turbine uses water velocity to move its runner. In a Pelton machine, free jets strike buckets arranged around the wheel. The water discharges at atmospheric pressure. DOE describes impulse turbines as generally suited to high-head, low-flow applications, with Pelton machines used for very high heads.

Think of a controlled jet rather than a wheel submerged in a river. Water acquires velocity through the nozzle; the runner extracts work as it redirects that stream. The water must then leave. A Pelton runner operates in an aerated space above the downstream water, rather than submerged in a pressurised passage.

Reaction: work inside the water passage

A reaction turbine uses the combined action of pressure and moving water. Its runner sits directly in the stream, with water flowing over the blades. Francis and propeller machines, including Kaplan turbines, belong to this family. Reaction turbines generally serve higher flows and lower heads than impulse machines, though individual designs cover different ranges.

Site: head and flow; Impulse: jet and buckets; Reaction: pressure and flow; Francis: fixed blades; Kaplan: adjustable blades
Original IOI explanatory diagram, based on the linked sources; not to scale.

This is a physical distinction, not a quality ranking. An impulse machine has jets meeting buckets in an aerated space. A reaction machine works through pressure and flow in water-filled passages. Each requires the appropriate inlet and outlet arrangement.

Francis: a fixed runner in a guided flow

The Francis runner has fixed blades. Water is introduced around and above it, then passes through the rotating assembly. DOE names the scroll case, wicket gates and draft tube among its main parts. The wheel visible in an exhibit is only one piece of this directed water route.

Fixed runner blades do not mean the station has no flow control. Gates and runner are separate components with separate jobs. DOE describes Francis machines as commonly used in medium- to high-head situations, while noting that lower-head applications exist. A simple label should not be mistaken for a sharp boundary between every possible installation.

Kaplan: an adjustable propeller

A propeller turbine resembles a boat propeller inside a water passage, except that it receives energy instead of propelling a vessel. In the Kaplan version, the runner blades and wicket gates are adjustable. DOE explains that this allows a wider range of operation. Adjustment helps the machine meet changing conditions.

That matters because a river varies and a turbine does not spend its whole life at one ideal operating point. The question is how the selected system works across the conditions expected at the site. A design-point illustration cannot by itself explain a machine's performance over a working year.

A turbine belongs to its waterway

The machine's position relative to downstream water, the route into it and the route out all matter. DOE explicitly includes setting depth among selection factors. A turbine is not independent of the civil works surrounding it. Its passages are part of the energy-conversion system, not decorative packaging around a wheel.

The Hydroelectric Dam follows these machine families from the water wheel into the modern powerhouse. Their names do not describe a ladder from primitive to advanced. Pelton, Francis and Kaplan are different answers to different combinations of head, flow and operation. Understanding those combinations is more useful than declaring one runner the winner.

Quick answers

Is Francis an impulse turbine?

No. Francis is a reaction turbine.

Are Kaplan blades adjustable?

Yes. Kaplan runner blades and wicket gates are adjustable.

Sources

Technical claims checked against the sources below; no current market-size or price claim is made.

More from this book

Process · From the book The Hydroelectric Dam: Water, Concrete, Power

How a hydroelectric dam turns water into electricity

A dam does not make electricity by holding water still.

Plant design · From the book The Hydroelectric Dam: Water, Concrete, Power

Reservoir or run-of-river: what storage changes

One plant holds water for later.

Storage · From the book The Hydroelectric Dam: Water, Concrete, Power

How pumped storage turns two reservoirs into a battery

The uphill journey consumes electricity.

Environment · From the book The Hydroelectric Dam: Water, Concrete, Power

What a hydroelectric dam changes in a river

Water leaves a turbine without becoming ash or exhaust.