Process · Energy · Oil Gas and Consumable Fuels
How a coal power station works
A coal power station is a kettle on an industrial scale: grind the coal, burn the powder, boil water into steam, spin a turbine, catch the steam and start again. The genius is in the margins of efficiency fought over for a century.
From the book Coal: Seam, Fire, GridChapters 15, 16, 19 and 20. Read the full book free as a PDF.
For all its scale, a coal-fired power station does one thing: it converts the chemical energy of an ancient swamp into electricity by way of steam. The chain has six links, and each one has been polished for more than a hundred years.
Fire to steam
It starts in the mill, where incoming coal is ground to a powder as fine as flour, because powder burns fast and completely in a way lumps never can. Blowers hurl it into the boiler, a tower of water-filled steel tubes wrapped around a fireball. The flames heat the tubes, and the water inside flashes into high-pressure steam, hotter and harder than anything a nineteenth-century engine ever saw.
The steam then does the only useful work in the building: it expands through the turbine, a shaft carrying thousands of precision blades, and spins it at a steady 3,000 or 3,600 revolutions per minute, locked to the grid. Bolted to the same shaft is the generator, where rotating magnetic fields induce current in copper windings. Motion becomes electricity.
Back to water
Spent steam leaving the turbine is still precious, so it is condensed back to water in the condenser and pumped to the boiler to begin again. The heat the condenser pulls out has to go somewhere. Many stations pass it to the air through cooling towers, the hyperboloid concrete shells that define the industry's skyline, while others use once-through river or lake water or cooling ponds, and some use dry cooling. At a tower, the white plume is mostly condensed water droplets, not smoke: the station's waste heat leaving as clouds.

The arithmetic of a third
Here is the uncomfortable number at the heart of it all. In a typical plant, only about a third of the coal's energy leaves as electricity; the rest warms rivers and skies. The U.S. Energy Information Administration's worked example makes it concrete: a plant needing 10,500 Btu of fuel per kilowatthour is running at 33 percent efficiency, and only the best heat rates, around 7,500 Btu per kilowatthour, reach 45 percent. Engineers fight for every point with higher steam temperatures and pressures, reheats and better blades, but the physics of heat engines sets a hard ceiling.
Cleaning the exhaust
What does not leave through the cooling system leaves through the stack, and modern stations strip it in stages. Electrostatic precipitators charge the fly ash and pull it from the flue gas; scrubbers spray limestone slurry to catch sulphur dioxide as gypsum; burners and catalysts tame the nitrogen oxides that make smog. The ash itself has become a product, sold into cement and concrete, though spills and slurry failures remain among the industry's worst accidents.
Where the world burns
That machine, multiplied by thousands, still anchors the world's electricity. The International Energy Agency estimates that global coal demand reached 8,805 million tonnes in 2024, a new record, with China and India together accounting for 71 percent of consumption. Coal still supplies about 35 percent of the world's electricity, the largest single source, even as wind and solar grow faster than any source in history: in 2024, low-carbon sources passed 40 percent of global generation for the first time since the 1940s, and yet fossil generation still rose 1.4 percent, pushing power-sector emissions to a record 14.6 billion tonnes of CO2, according to Ember's Global Electricity Review 2025.
The result is a strange moment in industrial history. The steam cycle that Newcomen began in a Staffordshire pit now runs at temperatures and scales he could not have imagined, cleaner and more efficient in every way, and its era is visibly closing. The book follows the whole arc, from the boiler tube to the phase-down.
Quick answers
How does a coal power plant generate electricity?
Coal is ground to powder and burned in a boiler, turning water into high-pressure steam. The steam spins a turbine connected to a generator, which produces electricity. Spent steam is condensed and reused; the waste heat is rejected through a cooling system, which at some plants is a cooling tower.
How efficient is a coal power plant?
A typical coal plant converts about a third of the fuel's energy into electricity: the EIA's example heat rate of 10,500 Btu per kWh works out to 33 percent. The best plants, at around 7,500 Btu per kWh, reach 45 percent.
How much coal does the world use?
Global coal demand reached an estimated 8,805 million tonnes in 2024, a record, per the IEA. China and India together account for 71 percent of consumption, and coal still supplies about 35 percent of world electricity.
