Cover of Coal: Seam, Fire, Grid, a book by Ketineni RamaraoFrom the book Coal: Seam, Fire, Grid
Chapters 1 and 3. Read the full book free as a PDF.

Pick up a lump of lignite and a lump of anthracite and you can feel the ranking system with your hands. The lignite is light, crumbly and brown, closer to the peat it recently was. The anthracite is dense, cold and glossy, almost metallic, and it is nearly pure carbon. Between them lie the coals that power the modern world.

Rank is a measure of coalification: how far burial, heat and pressure have driven out water and volatile compounds and concentrated carbon. The U.S. Energy Information Administration sorts coal into four ranks, and its carbon ranges are the standard shorthand.

Diagram of the ranks of coal from peat to anthracite with carbon percentages for each stage.
The ranks of coal, with carbon ranges from the U.S. Energy Information Administration. Original IOI diagram.

Lignite: the young coal

Lignite is 25 to 35 percent carbon, with high moisture and the lowest heating value of any rank. Because it is cheap and bulky, it rarely travels far: lignite is mined in open pits and burned in power stations built at the pit mouth, a pattern visible from Germany's Rhineland to the Powder River Basin's southern cousins. Leonardite, a weathered, oxidised form of lignite, is soft enough to crush by hand.

A dark brown slab of soft, earthy coal with a matte surface and rough fractured edges.
Leonardite, a weathered form of lignite, from North Dakota. Lignite is the youngest and wettest rank of coal, closest to the peat it started as. Photo: James St. John, CC BY 2.0, via Wikimedia Commons.

Sub-bituminous and bituminous: the workhorses

Sub-bituminous coal, at 35 to 45 percent carbon, is dull black and cleaner-burning than lignite; much of the American West's output is in this class. Bituminous coal, 45 to 86 percent carbon, is the most abundant and versatile rank. It fires power stations, and certain bituminous coals have a second, stranger talent: heated in the absence of air, they soften, swell and resolidify into coke, the porous carbon skeleton that supports iron ore in a blast furnace. Without coking coal, conventional steelmaking stops.

A flat slab of dull black bituminous coal with visible banding, photographed against a white background.
Bituminous coal from the Upper Freeport seam, Ohio. This mid-rank coal fires most coal power stations and is baked into coke for steelmaking. Photo: James St. John, CC BY 2.0, via Wikimedia Commons.

Anthracite: the veteran

Anthracite is 86 to 97 percent carbon, the product of unusual geological violence, such as seams caught in mountain-building. It burns hot, slow and clean compared with softer coals, but it is hard to ignite and scarce, less than one percent of U.S. production. Today it goes mostly to specialist metallurgical and industrial uses.

America's anthracite tells the story neatly. Every mine producing it sits in northeastern Pennsylvania, where the Appalachian orogeny folded and cooked the old coalfield into the highest rank. The same event that raised the mountains upgraded the coal, which is why premium rank so often sits next to dramatic geology.

Beyond the ranks

Push coalification further still and the series ends in graphite, the soft grey carbon of pencils and electrodes, which is no longer coal at all.

Uses follow the ladder rung by rung. Lignite is a power-station fuel and little else. Sub-bituminous coal is prized for its low sulphur, which is why western American utilities built their fleets around it. Bituminous coal splits two ways: most goes to boilers as thermal coal, while the fraction that cakes properly goes to coke ovens for the steel industry. Anthracite, too valuable to waste on ordinary boilers, feeds filters, furnaces and specialist metallurgy.

The ranks also map onto geography. The ancient, heavily folded coalfields of the eastern United States, South Wales and the Ruhr tend to hold bituminous coal and anthracite, because mountain-building supplied the heat. Younger, flatter basins, such as those of the American West or Germany's Rhineland, hold sub-bituminous coal and lignite, still waiting on geology that will never come.

Rank is not the only axis on which coal is judged. Buyers also care about ash, sulphur and moisture. Two coals of the same rank can behave very differently in a boiler, which is why coal is traded against detailed laboratory certificates rather than by name alone. But rank sets the outer envelope: no amount of washing turns lignite into anthracite.

Quick answers

What are the 4 types of coal?

The four ranks, from lowest to highest, are lignite (25-35% carbon), sub-bituminous (35-45%), bituminous (45-86%) and anthracite (86-97%). Rank reflects how much heat and pressure the coal has experienced, per the U.S. Energy Information Administration.

Which type of coal is best for electricity?

Most power stations burn bituminous or sub-bituminous coal because they combine good heating value with easy ignition. Lignite is burned where it is cheap and local; anthracite is too scarce and slow-burning for most power boilers.

What is the difference between thermal coal and coking coal?

Thermal coal is burned for heat and electricity. Coking coal, a quality subset of bituminous coal, is baked without air into coke, which reduces and supports iron ore in blast furnaces for steelmaking.

Sources

Carbon ranges, rank definitions and U.S. production shares are from the U.S. Energy Information Administration, "Coal explained". Chapters 1 and 3 of the book cover coal types and seams.

More from this book

Geology · From the book Coal: Seam, Fire, Grid

How coal is formed, from swamp to seam

Coal is a forest that lost an argument with time.

Extraction · From the book Coal: Seam, Fire, Grid

How coal is mined: surface pits and deep longwalls

Coal mining has exactly two strategies.

Process · From the book Coal: Seam, Fire, Grid

How a coal power station works

A coal power station is a kettle on an industrial scale: grind the coal, burn the powder, boil water into steam, spin a turbine, catch the steam and start again.