Cover of Soap: Ash, Fat, Foam, a book by Ketineni RamaraoFrom the book Soap: Ash, Fat, Foam
Chapters 1, 2 and 11. Read the full book free as a PDF.
A single dark brown oval bar of soap with the words Dudu-Osun pressed into its surface, photographed on a dark slate background.
A bar of Dudu-Osun, a branded African black soap sold internationally. This is a packaged commercial product, not a village-made batch. Photo: Ashley Pomeroy, CC BY-SA 4.0, via Wikimedia Commons.

What it is

Black soap, African black soap, alata samina, ose dudu and sabulun salo are names for the same family of soap. It is thought to originate in West Africa and is most associated with Ghana and Nigeria. Wikipedia credits the Yoruba people of Nigeria. Like all soap, it combines a fat or oil with an alkali. Here the alkali is ash-derived, from agricultural waste, and the oils are plant oils. There is no single recipe: formulations vary by producer, and the name covers many soaps.

Ash first

The alkali is made by burning plant matter such as roasted plantain peels, cocoa pods, banana leaves, palm leaves or shea tree bark. Leaching the ash with water gives an alkaline solution containing potassium carbonate and other soluble salts; the composition varies. The scientist-written review in what-the-chem describes the steps: gather agricultural waste, sun-dry it, roast it, often in clay ovens, then add the ash to water and filter it to obtain the alkali.

The Nigerian study from Osun State Polytechnic adds that the roasting of the plantain determines the colour of the soap, which ranges from light brown to deep black. Wikipedia says that despite the name, African black soaps are rarely black, and some of the highest-quality ones range from beige to dark brown.

Then oil

The oils are extracted from plant material too. Common base oils are palm kernel oil, palm oil and shea butter, sometimes with coconut oil. According to the Nigerian study, coastal regions tend to use more coconut oil, while savanna regions use more shea butter. Wikipedia notes that use of shea butter in African black soap dates to the 14th century.

Cooking

Diagram of the traditional steps for African black soap: dry the plant matter, burn it to ash, leach the ash with water to make lye, cook it with oils for hours, then scoop out and cure.
The traditional steps for African black soap, as described in the sources listed below. Original IOI diagram.

The ash lye is added to the oils and the mixture is heated and hand-stirred. what-the-chem says this takes several hours. Wikipedia says at least 24 hours. The two sources differ, and the real time depends on the batch. The soap is then scooped out, shaped and set to cure. It is soft and crumbly rather than hard like the Mediterranean bars in the types of soap.

The pH question

Like most soap, black soap is alkaline. what-the-chem reports pH of about 8.5 to 10 for plain recipes, citing one study in which cocoa pod ash soap measured 8.9 and plantain peel ash soap 9.4. That high pH can swell the outer layer of the skin and cause dryness, especially for people with eczema, so many makers add extra oil, which is the same idea as superfatting in cold process soap.

The Nigerian study measured one batch of cocoa pod ash and palm kernel oil soap, with aloe vera and honey added. It found 9.5 percent moisture, 0.096 percent free alkalinity and 5.3 percent unsaponified neutral fat. The authors judged it comparable to industrial soap. That is one small study of one recipe and should not be read as the standard for the category.

Authentic versus branded

The Nigerian study says authentic African black soap is made with hand-made potash in small batches, not factories using commercial potash and refined oils. The bar in the photograph is a commercial brand, Dudu-Osun, made with camwood leaves according to Wikipedia. Both are black soap, but they are different products, and the reaction behind both is the one in how soap is made.

For where ash-and-fat soap sits in the long record, see the history of soap.

Quick answers

How is African black soap made?

Plant matter such as plantain skins and cocoa pods is dried and burned to ash. The ash is mixed with water and filtered to make an alkaline liquid, which is cooked with oils such as palm kernel oil or shea butter for hours, then cured.

What is the alkali in African black soap?

Ash from burned plant waste, such as plantain peels, cocoa pods, banana or palm leaves.

What is the pH of African black soap?

Typically about 8.5 to 10 for plain recipes, like most soap, which is why it can dry the skin.

Where does African black soap come from?

It is thought to originate in West Africa, and is associated with Nigeria (the Yoruba, who call it ose dudu) and Ghana (alata samina).

Sources

Process steps and pH ranges are from what-the-chem (a science-writing site that cites published studies). The Nigerian composition figures are from one small-journal paper on a single recipe and are reported as such. Cooking time differs between sources (several hours versus at least 24 hours) and both are shown.

More from this book

Process · From the book Soap: Ash, Fat, Foam

How soap is made: from fat and lye to the bar

Soap is the oldest chemical manufacture most people still use every day.

Types · From the book Soap: Ash, Fat, Foam

Types of soap: hard, soft, Castile, Marseille, Aleppo and detergent bars

A bar called soap might be an olive oil block cured for months, a potash paste cooked over a fire, or a synthetic detergent that the regulator says is not soap at all.

History · From the book Soap: Ash, Fat, Foam

The history of soap: from Babylonian clay to the detergent age

Soap goes back about 4,800 years on the written evidence.

Technique · From the book Soap: Ash, Fat, Foam

Cold process soap making: how it works, what trace means and why you cure

Cold process is the method most handmade soap uses.