Geology · Energy · Oil Gas and Consumable Fuels
How crude oil is formed: from plankton to reservoir
Oil is plankton that got buried and slow-cooked by the planet. The recipe needs the right ingredients, a narrow window of heat, and a geological accident to keep the result in place until a drill finds it.
From the book Crude Oil: Rock, Fuel, EmpireChapters 1 to 3. Read the full book free as a PDF.
Start in an ancient ocean. The U.S. Energy Information Administration's summary is the standard one: crude oil formed from the remains of tiny marine organisms, plankton and diatoms, that lived millions of years ago, before the dinosaurs, in seas long vanished. When they died, their remains settled into the mud of the seafloor. In stagnant, oxygen-poor water, the usual recycling failed, and the organic matter was preserved rather than eaten, buried deeper with each layer of sand, silt and rock above it.
The kitchen
Burial is cooking. Deeper means hotter, and as the organic mud is heated over millions of years its organic matter, kerogen, breaks down into liquid hydrocarbons. The window is narrow: too little heat and the kerogen sits unchanged; too much and the oil itself is cooked further into natural gas, and then destroyed. Geologists call the productive range the oil window, and most of the world's oil comes from source rocks that spent long ages passing slowly through it. The word petroleum itself means rock oil.
Reading the kitchen's record
Source rocks carry their history in their chemistry. Different kerogens, from lake algae, marine plankton or land plants, mature toward different mixes of oil and gas, which is why some provinces are oily and others gassy. Geologists read the record with well cuttings, cores and seismic surveys, mapping where the kitchen was, when it cooked, and whether the products had anywhere to go. The exploration chapter of the industry is this detective work at continental scale.
The journey and the trap
Oil does not stay where it is born. Squeezed by the weight of the rock above, the newly formed oil migrates, seeping upward through pores and fractures until something stops it. A reservoir is that stopping place: a porous, permeable rock, usually sandstone or limestone, that can hold the oil, capped by an impermeable seal, shale or salt, that the oil cannot pass. The geometry that holds the seal in place, a folded arch of rock, a fault, a bulging salt dome, is the trap, and finding traps is the whole science of exploration.
Timing is the cruellest variable. A trap that formed after the oil migrated holds nothing. A seal breached by later faulting lets the accumulation escape, leaving only the tarry seeps that told ancient peoples the oil was there. Many of the world's seeps are the graves of fields that leaked away before anyone could drill them.
And sometimes the oil never leaves the kitchen at all. In shale, the source rock is too tight for the oil to migrate, so it stayed put for a hundred million years until horizontal drilling and hydraulic fracturing went in after it, the revolution the drilling article describes. The line between source rock and reservoir, geology's oldest distinction in the oil business, is the one the newest technology erased.
Every element of the recipe is rare in combination: rich source rock, the right cooking, good reservoir, a tight seal, and a trap formed before the oil moved. That is why oil is found in provinces rather than everywhere, why the great fields sit atop ancient seaways, and why a dry hole is the industry's normal result. The Earth made the oil exactly once; the entire upstream industry is the search for where it stopped.
Quick answers
How long does it take for oil to form?
Millions of years. Marine plankton buried in sediment must be heated within the oil window, a narrow temperature range, over geological time before kerogen converts to crude oil.
Does oil come from dinosaurs?
No. Crude oil formed mainly from marine plankton and algae that lived long before the dinosaurs, buried in ancient seafloor mud and cooked by the Earth. The dinosaur story is a persistent myth.
What is an oil trap?
A trap is the geological arrangement that stops migrating oil: a porous reservoir rock, such as sandstone or limestone, sealed above by impermeable shale or salt, folded or faulted into a shape that holds the oil in place.
