Process · Energy · Oil Gas and Consumable Fuels
How crude oil is refined, from barrel to products
A barrel of crude is a mixture of thousands of hydrocarbons and, as pumped, almost useless. The refinery is the machine that sorts the mixture by boiling point and then rebuilds the parts the market actually wants.
From the book Crude Oil: Rock, Fuel, EmpireChapters 18 to 21. Read the full book free as a PDF.
Refining begins with a separation, not a reaction. Crude oil is pumped through hot furnaces and discharged, part liquid and part vapour, into the base of a distillation column, the tall steel tower that defines every refinery skyline. Inside, the mixture sorts itself by boiling point, exactly as the U.S. Energy Information Administration describes it: the lightest fractions, refinery gases and gasoline vapours, rise to the cool top of the tower and condense; kerosene and diesel condense in the middle; heavy gas oils collect lower down; and the heaviest residue, the stuff of asphalt and bitumen, never vaporises at all and is drawn from the bottom. Simple refineries run one atmospheric column; complex ones add a vacuum column to tease more from the residue.
Cracking: breaking molecules to order
Distillation gives the refinery fractions, but not in the proportions customers buy. The market wants gasoline; a straight distillation of most crudes yields too little of it and too much heavy oil. The industry's answer is conversion, above all cracking: heat, pressure and catalysts break the big, low-value heavy molecules into the smaller, high-value ones gasoline is made of. The fluid catalytic cracker, and its cousin the hydrocracker that adds hydrogen to the reaction, are the engines of the modern fuels refinery, turning the bottom of the barrel into the top of the market.
Around these core units sits a web of treatment: hydrotreaters strip sulphur from diesel and gasoline to meet clean-fuel rules, reformers rearrange naphtha molecules into high-octane blendstock, and alkylation units stitch small molecules into premium gasoline components. A modern refinery is less a single process than a chemical city, and it runs around the clock, on sites the EIA compares to several hundred football fields.
Simple stills and complex cities
Not every refinery can do all of this. A simple topping plant is little more than a column: it separates crude and sells the heavy residue on. The great complexes of the Gulf Coast, Rotterdam and Singapore add vacuum units, crackers, cokers and every treatment known to the art, and the industry measures their sophistication by how much of the barrel they can force into light, valuable products. Where a refinery sits on that scale decides which crudes it can profitably run: heavy, sour crudes are cheap precisely because only the complex refineries can handle them.
What a barrel becomes
The yields tell the story of demand. From an average 42-gallon barrel of crude, American refineries produce about 19 to 20 gallons of motor gasoline, 11 to 13 gallons of distillate fuel, most of it diesel, and 3 to 5 gallons of jet fuel, plus more than a dozen other products, from the feedstocks of the petrochemical industry to the asphalt under the roads the gasoline drives on. Refineries tune the slate seasonally and with prices, squeezing more diesel in winter and more gasoline for the summer driving season.
That tuning is the quiet genius of the system. Crude arrives by tanker and pipeline as an undifferentiated commodity, and leaves as the precisely specified fuels of aviation, trucking and motoring, each blended to a legal recipe. The still and the cracker are a century old; the optimisation software is not. Together they are the alchemy of the barrel.
Quick answers
What are the steps in refining crude oil?
Separation first: crude is heated and split by boiling point in distillation columns. Then conversion, chiefly cracking, breaks heavy fractions into lighter ones. Finally treatment removes sulphur and adjusts octane before blending into finished fuels.
How much gasoline comes from a barrel of oil?
U.S. refineries produce on average about 19 to 20 gallons of motor gasoline from a 42-gallon barrel of crude, plus 11 to 13 gallons of distillate such as diesel and 3 to 5 gallons of jet fuel, according to the EIA.
What is cracking in an oil refinery?
Cracking uses heat, pressure and catalysts, sometimes with hydrogen, to break large heavy hydrocarbon molecules into smaller, more valuable ones, chiefly gasoline blendstocks. Fluid catalytic cracking and hydrocracking are the main types.
