Cover of The Air Conditioner: Ice, Vapor, Empire, a book by Ketineni RamaraoFrom the book The Air Conditioner: Ice, Vapor, Empire
Chapters 8, 9, 10 and 11. Read the full book free as a PDF.

The window unit

The postwar workhorse: the whole loop, compressor, coils, fans, in one box that hangs in a window. Cheap, self-contained, installable in an hour, and the machine that carried air conditioning into ordinary homes. It cools one room, it blocks part of a window, and it hums. In much of the world it is being displaced by the split, but it remains the entry-level machine and the renter's friend.

The split

Put the noisy half outside. A split system keeps the compressor and condenser in an outdoor unit and mounts the evaporator and its fan on an inside wall, joined by a refrigerant line-set through a small hole. Quieter, more efficient, better looking, and the dominant form worldwide: Japanese makers turned the ductless split into the global default, and industry statistics show room air conditioners of this family making up most of the roughly 131.6 million units of world demand estimated for 2024 by the Japan Refrigeration and Air Conditioning Industry Association. A multi-split lets one outdoor unit feed several indoor ones.

A modern split-type air conditioner indoor unit mounted high on a wall
The indoor half of a split-system air conditioner. The noisy condenser sits outside, joined by refrigerant lines through the wall. Photo: Curpharar, CC BY-SA 4.0, via Wikimedia Commons.

Central ducted systems

The North American house answer: one large evaporator coil in the air handler, one outdoor condenser, and the same ducts that carry the furnace's heat carrying summer's cold. Invisible in use, even across rooms, but it demands ducts, which much of the world's housing does not have. Where there are no ducts, the split wins; where ducts exist, central air is invisible comfort.

Chillers and air handlers

Big buildings do not cool air directly; they cool water. A chiller, often a centrifugal machine descended from Carrier's 1922 centrifugal chiller and large as a bus, makes chilled water that is pumped to air-handling units on each floor, and the heat is rejected through a cooling tower on the roof. Offices, hospitals, malls and airports live on this arrangement. Stretch it further, one chiller plant feeding many buildings through buried pipes, and it becomes district cooling, a utility that sells chilled water the way the power company sells electricity.

Variable refrigerant flow

The commercial middle path: one outdoor unit metering refrigerant, not water or air, to dozens of indoor units, each throttled to its room. The building gets zone-by-zone control without ductwork or a chiller plant, which is why VRF has spread through hotels, schools and mid-size offices.

Heat pumps wear the same body

One more identity: most modern splits and many central systems are heat pumps, the identical loop with a reversing valve, so the "type" of a unit includes whether it can heat. In mild winters a heat pump heats for a fraction of the cost of resistance electric heat, which is why the same box increasingly carries a house through both seasons and why the sales figures increasingly count machines that do both jobs.

The odd cousins

Evaporative coolers chill air by evaporating water into it: no compressor, little electricity, and effective only where the air is dry. Absorption chillers run the loop on heat instead of electricity, using a flame or waste steam as the input, and appear where waste heat is free. Portables are window units on wheels with a hose. Each survives because some niche fits it exactly.

The packaged rooftop

Between the house and the tower sits the shop, the school, the small office. Their machine is the packaged rooftop unit: the whole loop in one weatherproof cabinet on the roof, ducts punched down into the ceiling. Ugly, rugged, cheap to service because the technician never enters the building, and the reason a strip mall can be chilled without a plant room.

Choosing among them

The decision tree is short. One room, no ducts, tight budget: window or portable. One to five rooms, no ducts: splits. Whole house with ducts: central. Whole building: packaged rooftops for the small, VRF for the medium, chillers for the large, district cooling where it exists. Dry climate, low budget, tolerance for breeze: evaporative. Most of these choices are the same vapour-compression loop in a different body (evaporative coolers and absorption chillers are the exceptions), sized in tons and judged by its efficiency ratio, so the buyer's real questions are where the heat should go and how much electricity the climb should cost.

How they are measured

Capacity is still quoted in tons of refrigeration, ASHRAE's 12,000 BTU per hour per ton, a unit older than the machines. Efficiency is quoted as a ratio of cooling out to electricity in, under names like EER and its seasonal siblings, and the spread is wide enough that the International Energy Agency treats efficiency standards as the main lever on cooling's electricity demand. The same room, the same comfort, very different bills: that spread is the subject of air conditioning's electricity demand.

Quick answers

What is the difference between a split and a window air conditioner?

A window unit holds the whole cooling loop in one box in the window. A split puts the compressor and hot coil outside and the cold coil on an inside wall, joined by refrigerant lines: quieter and usually more efficient.

What is a chiller?

A machine that cools water instead of air. Large buildings pump chilled water to air handlers on each floor and reject the heat through a cooling tower.

When does an evaporative cooler work?

Only in dry climates. It cools air by evaporating water into it, so it fails where the air is already humid.

Sources

The 131.6 million unit 2024 demand estimate is JRAIA's. The centrifugal chiller descent is from the DOE history. Type descriptions follow Chapters 8-11 of the book.

More from this book

Mechanism · From the book The Air Conditioner: Ice, Vapor, Empire

How air conditioners work

Most modern room air conditioners, and the large chillers descended from Carrier's machines, run the same vapour-compression loop: a fluid is squeezed, cooled into liquid, relaxed through a restriction, and boiled back into vapour.

History · From the book The Air Conditioner: Ice, Vapor, Empire

Who invented air conditioning

Willis Carrier invented modern air conditioning in 1902, but he did not invent it to cool people.

Energy · From the book The Air Conditioner: Ice, Vapor, Empire

Air conditioning's electricity demand, in numbers

About one kilowatt-hour in ten, worldwide, now goes into cooling air.