Cover of Portland Cement: Stone, Fire, Concrete, a book by Ketineni RamaraoFrom the book Portland Cement: Stone, Fire, Concrete
Chapters 11 and 21. Read the full book free as a PDF.
A ready-mix truck with its chute extended pours wet grey concrete into a trench for house footings, with two workers in dark clothes and an orange high-visibility jacket beside it and a wheelbarrow in the foreground.
A fresh pour of concrete to form footings for a house extension in Trimingham, Norfolk, England, January 2021. The cement arrived at the site as a powder; here it is already mixed with water, sand and stone. Photo: Kolforn, CC BY-SA 4.0, via Wikimedia Commons.

The ladder from powder to structure

Franz-Josef Ulm, faculty director of the MIT Concrete Sustainability Hub, lays it out in order. Cement is brought to a site and mixed with water, where it becomes cement paste. Add sand and the paste becomes mortar. Add large aggregates, stones up to about an inch across, and the mortar becomes concrete. The American Cement Association says cement typically makes up 10 to 15 percent of the concrete mix by volume. The rest is water, sand and rock.

What cement makes

MIT's description of the powder: limestone is quarried, mixed with a silica source such as slag or fly ash, and fired in a kiln at 2,700 degrees Fahrenheit. The result is clinker. Cement plants grind clinker to an extremely fine powder and mix in a few additives. The full route is in how Portland cement is made.

Hydration: why it hardens

Concrete does not dry into a solid. It reacts. The reaction between cement and water is called hydration. In Ulm's words, the clinker dissolves into calcium and recombines with water and silica to form calcium silicate hydrates. This is why concrete can harden under water, and why the American Cement Association calls these materials hydraulic cements.

The ACA describes it more simply: concrete is formed when Portland cement creates a paste with water that binds with sand and rock to harden.

Why the amount of water matters

Inside the hardened material are tiny pores. Between the bonds of the calcium silicate hydrate, gel pores form about 3 nanometres across. Water that does not react remains and creates larger capillary pores. MIT reports research finding that cement paste is so porous that 96 percent of its pores are connected.

That is why the water-to-cement ratio is the central lever. Ulm explains that high-performance concrete, developed in the 1980s, came from realising that capillary pores can be reduced in part by reducing the water-to-cement ratio. Less leftover water means larger pores are reduced and strength increases. The catch is that a lower ratio needs more cement for the same volume, and that can increase the environmental impact, depending on how the cement is made.

The carbon in the powder

Concrete is the world's most-used material after water, according to MIT, and cement is the primary binder in it. When calcium carbonate is fired in a kiln to make conventional cement, a chemical reaction releases carbon dioxide. That reaction, together with the kiln fuel, is why MIT says cement contributes around 8 percent of global emissions. The EPA confirms that these two sources, fuel combustion and the calcination reaction, account for essentially all emissions from cement manufacturing, and that finish grinding adds no direct process CO2 from calcination, though it uses electricity that can cause indirect emissions.

Because cement is only 10 to 15 percent of the mix, changes at the cement plant matter a great deal per tonne of concrete. The American Cement Association says that blending higher ratios of limestone or supplementary cementitious materials into cement can reduce a plant's carbon footprint by up to 10 percent. The kinds of cement that make this possible are described in types of Portland cement.

What the pour shows

On a building site the cement arrives already mixed by the ready-mix plant, with the water, sand and stone. A truck like the one in the photograph delivers it wet, and the clock starts: hydration begins when the water meets the cement. That is why concrete is ordered for a set time and placed quickly. The ACA notes that when a project sits within 15 miles of a ready-mix plant, the energy savings and reduced emissions from transport are significant.

Quick answers

What is the difference between cement and concrete?

Cement is the powder binder. Concrete is cement mixed with water, sand and stone. Cement typically makes up 10 to 15 percent of concrete by volume.

How does concrete harden?

By hydration, a chemical reaction between cement and water that forms calcium silicate hydrates. It is a reaction, not drying, so it also works under water.

Why does the water-cement ratio matter?

Less leftover water means fewer large pores and higher strength. A lower ratio needs more cement for the same strength, which can raise the carbon impact.

How much of global CO2 comes from cement?

MIT says cement contributes around 8 percent of global emissions, from kiln fuel and from the CO2 released by limestone when it is fired.

Sources

The cement, mortar and concrete ladder, hydration and the pore figures are from MIT News (an interview with Franz-Josef Ulm). The 10 to 15 percent figure and the 15-mile haulage point are from the American Cement Association. The photo caption describes the scene and does not claim a specific mix.

More from this book

Process · From the book Portland Cement: Stone, Fire, Concrete

How Portland cement is made

Cement is rock that has been cooked until it changes chemistry, then ground back to powder.

Types · From the book Portland Cement: Stone, Fire, Concrete

Types of Portland cement: Type I to V, blended and performance cements

There is no single thing called cement on a construction site.

Technology · From the book Portland Cement: Stone, Fire, Concrete

Dry process vs wet process: why cement kilns changed

A cement kiln has to drive off water, split limestone into lime and carbon dioxide, and then fuse the result.

History · From the book Portland Cement: Stone, Fire, Concrete

Who invented Portland cement? Aspdin, Smeaton and a long argument

The usual answer is Joseph Aspdin, a Leeds bricklayer, in 1824.