Cover of Portland Cement: Stone, Fire, Concrete, a book by Ketineni RamaraoFrom the book Portland Cement: Stone, Fire, Concrete
Chapters 22 and 23. Read the full book free as a PDF.
A tall stack of grey-brown paper cement bags with Chinese characters printed on them, piled against a brick wall beside a shop doorway, photographed in Keelung, Taiwan.
Bagged Portland cement marked Type 1 outside a shop in Keelung, Taiwan, 2018. Type I is the general-purpose type of the ASTM C150 standard. Photo: Solomon203, CC BY-SA 4.0, via Wikimedia Commons.

Three standards, three ways of naming

In the United States, cement is sold under three families of specification. ASTM C150 covers Portland cement and defines the numbered types. ASTM C595 covers blended hydraulic cements. ASTM C1157 is a performance specification for hydraulic cement. The American Cement Association's comparison table lists them side by side.

All of them are hydraulic cements, meaning they react chemically with water and can do so under water.

The five ASTM C150 types

The American Concrete Institute lists the standard portland cement types as follows.

The ACA states the four basic types in the harmonised ASTM C150 and AASHTO M 85 standards as I, II, III and V. Some cements carry more than one designation. Types I, II and III also come in air-entraining versions, designated IA, IIA and IIIA, which the ACA describes as a tool for freeze-thaw durability.

Blended cements

Blended cements are mixtures of Portland cement with other materials such as limestone, blast furnace slag or pozzolans like fly ash, silica fume and natural pozzolans. The ACA says blended cements have a lower carbon footprint than Portland cements and can improve durability. The most common type in the US now is Type IL, Portland-limestone cement. The USGS reports that blended cement accounted for 63 percent of total US cement shipments in the first nine months of 2025, and that 95 percent of blended shipments were estimated to be Type IL. That is a big shift from a market once dominated by plain Portland cement.

Performance cements

ASTM C1157 names cements by what they do rather than what they contain. The types include GU for general use, HE for high early strength, MS for moderate sulfate resistance, HS for high sulfate resistance, MH for moderate heat of hydration and LH for low heat. The ACI lists the same set.

Matching the cement to the job

General-purpose cement suits pavements, floors, reinforced concrete buildings, bridges, tanks, reservoirs, pipe, masonry units and precast products, according to the ACA. Moderate and low heat cements are for thick elements, where the heat released by hydration has to be limited. The ACA's example is Hoover Dam, built in 1935, which used a historical Type IV low-heat cement to control temperature rise. It adds that the broader use of these cements in the mid-1900s has since generally been replaced by other strategies to control heat.

The choice of type changes how the concrete behaves, not just what it costs. The ACA says moderate and low heat cements develop strength more slowly than other types. A cement that releases heat slowly is the right tool for a dam. A high-early-strength type is the right tool when forms must come off quickly. Neither is a better cement in general. That is also why understanding how Portland cement is made matters for choosing: grinding finer, or altering the chemistry, is what makes the types differ.

For what the cement becomes on site, see cement versus concrete.

Quick answers

What are the types of Portland cement?

ASTM C150 defines Types I (general use), II (moderate sulfate resistance), III (high early strength), IV (low heat) and V (high sulfate resistance). The ACA lists I, II, III and V as the four basic types in use.

What is Type IL cement?

Portland-limestone cement, a blended cement. The USGS estimates that 95 percent of US blended cement shipments in early 2025 were Type IL.

What is the difference between Type I and Type III?

Type I is general purpose. Type III gains strength faster and is often made by grinding Type I clinker finer or altering the composition.

Is Type IV cement still used?

The ACI says Type IV is not currently made in the United States and is limited in production elsewhere. Hoover Dam used a historical Type IV cement.

Sources

Type definitions are from the ACI FAQ and the ACA types page. The market share figures are USGS estimates for US shipments in the first nine months of 2025 and apply to the United States only. Other countries use other standards, such as the European EN 197 CEM classes, which this article does not cover.

More from this book

Process · From the book Portland Cement: Stone, Fire, Concrete

How Portland cement is made

Cement is rock that has been cooked until it changes chemistry, then ground back to powder.

Explainer · From the book Portland Cement: Stone, Fire, Concrete

Cement vs concrete: how concrete is made

People say cement when they mean concrete.

Technology · From the book Portland Cement: Stone, Fire, Concrete

Dry process vs wet process: why cement kilns changed

A cement kiln has to drive off water, split limestone into lime and carbon dioxide, and then fuse the result.

History · From the book Portland Cement: Stone, Fire, Concrete

Who invented Portland cement? Aspdin, Smeaton and a long argument

The usual answer is Joseph Aspdin, a Leeds bricklayer, in 1824.