History · Information Technology · Semiconductors and Semiconductor Equipment
The history of the transistor
The transistor was not found by luck. It was a failure, followed by a theory about why it failed, followed by an experiment that tested the theory. It took about two years from the failure to the first working device, and another ten to make it dependable enough to build an industry on.
From the book The TransistorChapters 3 to 10. Read the full book free as a PDF.
The idea came before the device
Engineers wanted a solid replacement for the vacuum tube long before they could build one. In 1926 Julius Lilienfeld filed a patent for a three-electrode amplifier based on copper sulfide, and attempts to build such a device carried on through the 1930s. None worked well enough to use.
The work that finally succeeded began at Bell Labs after the war. William Shockley returned in early 1945 to organise a solid-state physics group, and that April he conceived a field-effect amplifier built on the germanium and silicon technology developed during the war. It failed. A year later John Bardeen, a theoretical physicist, suggested that electrons trapped on the semiconductor surface were blocking the electric field from reaching the material. With the experimental physicist Walter Brattain he started studying those surface states.

16 December 1947
On that day Bardeen and Brattain pressed two closely spaced gold contacts, held by a plastic wedge, onto a small slab of high-purity germanium. The voltage on one contact modulated the current through the other. The signal came out amplified up to 100 times. On 23 December they showed it to Bell Labs officials, which Shockley called "a magnificent Christmas present".
The engineer John Pierce named the device the transistor. Bell Labs announced it at a press conference in New York on 30 June 1948. A spokesman said it "may have far-reaching significance in electronics and electrical communication." Many thousands of the delicate point-contact units were made in a metal cartridge as the "Type A" transistor.

Shockley's junction transistor
Shockley had not been part of the point-contact discovery and disagreed with Bardeen's explanation of it. On 23 January 1948 he conceived a different device built on the p-n junction that Russell Ohl had found in 1940: a three-layer sandwich of n-type and p-type material. He argued that positively charged holes could travel through the bulk of the crystal, not only along the surface. On 16 February 1948 John Shive showed that they did. Shockley applied for the junction-transistor patent that June.
The junction design was far easier to manufacture, but it needed new processes. In 1951 Gordon Teal grew large single crystals of germanium and, with Morgan Sparks, made an n-p-n junction transistor. Zone refining, pioneered at Bell Labs by William Pfann in 1950-51 and adapted to silicon by Henry Theurer from 1952, purified the materials to impurity levels as low as one part in ten billion. Purity, not cleverness, turned a laboratory result into a product.
From germanium to silicon
For the first six years every transistor was germanium. Germanium is easier to work, but its devices leak badly when switched off and were limited to 0 to 70 degrees Celsius. In January 1954 Morris Tanenbaum at Bell Labs made the first silicon transistor. Bell Labs did not pursue it commercially, and Texas Instruments made the first successful silicon transistor on 14 April 1954, an n-p-n grown-junction device, then announced on 10 May that silicon transistors were in production. Silicon units operate from -55 to 125 degrees Celsius, and by the end of the 1950s silicon was the industry's preferred material.
The prize, and the point
Shockley, Bardeen and Brattain shared the 1956 Nobel Prize in Physics "for their researches on semiconductors and their discovery of the transistor effect." The device they made now exists in an estimated 13 sextillion copies, a figure the Computer History Museum gives for the industry's total by 2018. For how it works, see how transistors work. For the two junction types, see NPN versus PNP transistors.
Quick answers
Who invented the transistor?
John Bardeen and Walter Brattain made the first working transistor at Bell Labs on 16 December 1947. William Shockley conceived the junction transistor in January 1948. All three shared the 1956 Nobel Prize in Physics.
What was the first transistor made of?
High-purity germanium with two gold contacts held against it by a plastic wedge. It was a point-contact device.
When did silicon replace germanium?
The first silicon transistor was made at Bell Labs in January 1954, and Texas Instruments began selling silicon devices that year. By the end of the 1950s silicon was the industry standard.
Sources
- Computer History Museum, "1947: Invention of the Point-Contact Transistor"
- Computer History Museum, "1948: Conception of the Junction Transistor"
- Computer History Museum, The Silicon Engine timeline
- Computer History Museum, "1951: Development of Zone Refining"
- Computer History Museum, "1954: Silicon Transistors Offer Superior Operating Characteristics"
- NobelPrize.org, "The Nobel Prize in Physics 1956"
- Computer History Museum blog, David Laws, "13 Sextillion & Counting" (2 April 2018)
