Cover of The Transistor, a book by Ketineni RamaraoFrom the book The Transistor
Chapters 1 and 28 to 31. Read the full book free as a PDF.

A valve for current

A tap lets a small movement of your hand start, stop or throttle a flow of water that your hand could never push itself. A transistor does that for electric current, with no moving parts. It has three connections. Two carry the main current through the device. The third is the control, and a small voltage or current there decides how much of the main current gets through.

That gives two basic uses:

The vacuum tube did the same job, but it was a heated glass bulb. The transistor does it inside a solid crystal, which is why it can be tiny, cold and cheap. For how that began, see the history of the transistor.

What is inside

The crystal is a semiconductor, usually silicon. On its own it conducts poorly. Adding tiny amounts of other elements, called doping, makes it either n-type, which has spare electrons, or p-type, which has gaps called holes that behave like positive charges. Controlling where each type sits is what makes a transistor. This only works if the crystal is exceptionally pure to begin with. Zone refining, developed at Bell Labs in 1950 and 1951, brought germanium and silicon down to impurity levels as low as one part in ten billion.

Two ways to build the valve

Bipolar junction transistor (BJT). A sandwich of three layers, n-p-n or p-n-p, with a very thin middle layer called the base. A small current into the base lets a much larger current flow from the emitter to the collector. Both electrons and holes take part, which is why it is called bipolar. The two types are compared in NPN versus PNP transistors.

Field-effect transistor (FET). In a MOSFET, the control terminal, called the gate, is separated from the semiconductor by an insulating layer. A voltage on the gate sets up an electric field that opens or closes a channel under it. Almost no current flows into the gate. The metal-oxide-semiconductor version, the MOSFET, is explained in the FET transistor explained.

About thirty power MOSFET transistors laid out on a white surface in rows: black plastic packages with three leads, round metal cans, and square bolt-down packages in several sizes.
Power MOSFETs in different packages. Each package holds one transistor chip, and the leads carry the gate, drain and source connections. Photo: Mister rf, CC BY-SA 4.0, via Wikimedia Commons.

Why one idea runs everything

MOS transistors are small, cheap and use little power. By the Computer History Museum's count, 13 sextillion transistors had been made by 2018 and 99.9 percent of them were MOS devices. That is 13 followed by 21 zeros. The historian David Brock calls the MOS transistor the most frequently manufactured human artifact in history.

A round silicon wafer patterned with a grid of small rectangular chips, shining in rainbow colours against a pale background.
A 300 mm (12 inch) silicon wafer carrying a grid of finished chips. Every chip holds transistors, and the rainbow sheen is light reflecting from the patterned surface. Photo: Peellden, CC BY-SA 3.0, via Wikimedia Commons.

The industry built on them sold $791.7 billion of semiconductors in 2025, up 25.6 percent on 2024, according to the Semiconductor Industry Association. At the leading edge, TSMC says its 2 nanometre process, which uses a new nanosheet transistor structure, began volume production in the fourth quarter of 2025. The device has changed shape. The job has not.

What a transistor cannot do

It does not create energy. It uses a small input to steer power drawn from a supply. As designers put hundreds of thousands of transistors on a chip, power density became the main problem, and the Computer History Museum says CMOS, which draws close to zero power on standby, gave the best answer.

Quick answers

What does a transistor do?

It lets a small control signal switch or scale a much larger current. Used as a switch it makes digital logic, and used as an amplifier it makes sound and radio signals stronger.

What is a transistor made of?

Mostly silicon that has been purified and then doped with small amounts of other elements to make n-type and p-type regions, plus insulating oxide and metal connections.

How many transistors have been made?

The Computer History Museum puts the total at about 13 sextillion by 2018, with 99.9 percent of them MOS transistors.

Go deeper in the book: The Transistor · PDF · Source Companion · Browse the category

Sources

The 100x figure and zone refining are from the Computer History Museum. The 13 sextillion count and 99.9 percent MOS share are from the museum blog. Industry sales are from the SIA release and the 2nm start of production from TSMC. The valve analogy follows Chapters 1 and 28 to 31 of the book.

More from this book

History · From the book The Transistor

The history of the transistor

The transistor was not found by luck.

Explainer · From the book The Transistor

NPN vs PNP transistors: what is the difference?

An NPN transistor and a PNP transistor are mirror images.

Explainer · From the book The Transistor

The FET transistor and the MOSFET, explained

The field-effect transistor was patented in the 1920s and could not be built for another thirty years.

Power · From the book The Transistor

What is an insulated gate bipolar transistor (IGBT)?

Logic transistors switch at very low voltages.