Cover of Sugar: Plant, Crystal, Empire, a book by Ketineni RamaraoFrom the book Sugar: Plant, Crystal, Empire
Part V: From plant to crystal. Read the full book free as a PDF.
Diagram of seven steps in a cane sugar factory: mill the cane, clarify the juice with lime, evaporate, crystallise in vacuum pans, spin in a centrifuge, ship raw sugar, refine and dry.
From cane to white sugar, following the US EPA description. Original IOI diagram.

Harvest and milling

A man in a dark patterned T-shirt stands smiling in a field of tall sugarcane, holding a long cut cane stalk across his body with a machete in the other hand.
Harvesting sugarcane by hand, Nigeria. Hand cutting is the most common harvesting method worldwide, according to the US EPA. Photo: Danjuma Anthony, CC BY-SA 4.0, via Wikimedia Commons.

The US EPA's process description starts at the field. Hand cutting is the most common harvesting method throughout the world, although Florida, Louisiana and Hawaii have used mechanical harvesters for years. Cane goes to the mill by trailer, truck, railcar or barge. At the mill it is cleaned, then milled in two steps: breaking the hard structure of the cane, then grinding it. The World Sugar Research Organisation describes the same stage in plain terms: stalks are washed, cut and the shreds pressed, which releases juice.

A black iron steam-powered cane mill with a large spoked flywheel, a pair of large gears and a rusty roller, displayed on a gravel floor in a covered museum space.
A steam-powered cane mill from an old sugar factory. The flywheel regulates speed, the gears transmit power and the rollers crush cane stalks. Such mills were widely used in the 19th century. Photo: Parchaco, CC0, via Wikimedia Commons.

The residual woody fibre is bagasse. The EPA lists it as fuel for the mill's boilers and lime kilns, as a raw material for paper and panel products, and for mulch.

Clarifying the juice

The raw juice is limed. The EPA says lime is added to neutralise organic acids, small amounts of soluble phosphate may be added, and the juice is heated to about 95 degrees Celsius (200 Fahrenheit). A heavy precipitate forms, called mud, which is separated from the juice in a clarifier by gravity or centrifuge.

Boiling off the water

Evaporation happens in two stages. First, an evaporator station concentrates the juice. These are multiple-effect evaporators, typically a series of five, using steam from large boilers. Second, vacuum pans crystallise the sugar. In pan boiling the syrup is evaporated until it reaches supersaturation. Crystallisation is started by seeding or shocking the solution. The mixture of liquor and crystals is called massecuite.

Spinning out the sugar

Centrifuges separate crystals from the liquid. The EPA describes the molasses from the first centrifuge returning to a vacuum pan for a second boiling, which gives a second massecuite and a second batch of crystals. The molasses from the second boiling is boiled again in the same way, and the raw sugar from each stage is combined. The thick dark syrup left at the end is molasses, a by-product. WSRO says the raw sugar is usually shipped in dry bulk to a refinery for further purification.

Refining to white

At the refinery, the EPA says the first step is affination: washing the raw sugar with warm, almost saturated syrup to loosen the molasses film. The washed sugar is melted, the syrup is screened and clarified, decolorised, then evaporated and crystallised in vacuum pans again. For granulated sugar, the crystals are dried in a granulator, typically at about 110 degrees Celsius, and cooled. Other refined products include powdered sugar, brown sugar, liquid sugar and edible molasses.

WSRO makes a point worth keeping: sugar is naturally white, and it is the naturally occurring molasses that gives brown sugar its colour. The difference between brown and white is the subject of brown sugar versus white sugar. The beet route differs, as explained in beet sugar versus cane sugar.

The machine behind the process

The oldest part of the factory is the mill. A 19th-century steam mill like the one pictured used rollers to crush cane. The history of how this system spread is in the origin and history of sugar.

Quick answers

How is sugar made from sugarcane?

Cane is milled to extract juice, the juice is clarified with lime, concentrated in evaporators, crystallised in vacuum pans and spun in centrifuges to give raw sugar, which is then refined.

What is bagasse?

The woody fibre left after the juice is extracted. Mills burn it as boiler fuel and it is also used for paper and panel products.

What is molasses?

The thick dark syrup left after sugar crystals are separated. It is a by-product of sugar production.

Why is raw sugar refined?

Refining washes, melts, clarifies and decolorises raw sugar, then recrystallises it to give white granulated sugar.

Sources

All process steps are from the US EPA AP-42 section (which describes typical US plants) and WSRO. The EPA says the second and later boilings continue in the same way; the number of boilings varies by plant. Photo captions describe the pictured scenes only.

More from this book

History · From the book Sugar: Plant, Crystal, Empire

The origin and history of sugar: from New Guinea cane to world commodity

Sugar began as a grass chewed for its juice.

Product type · From the book Sugar: Plant, Crystal, Empire

Brown sugar vs white sugar: what molasses changes and what it does not

White sugar is sucrose with the molasses removed.

Raw material · From the book Sugar: Plant, Crystal, Empire

Beet sugar vs cane sugar: how Europe learned to make sugar at home

Sugar from beet and sugar from cane are the same molecule.

Social history · From the book Sugar: Plant, Crystal, Empire

Sugar and slavery: how a crop built the Atlantic trade in enslaved people

Sugar was not the only crop grown by enslaved people.