Equipment · Materials · Paper and Forest Products
The paper machine: anatomy of the endless web
A modern paper machine is one of the largest continuously running machines ever built, and its core idea has not changed since 1798: pour fibre soup onto a moving wire and take the water out in the direction of travel.
From the book Paper: Fibre, Web, WorldChapters 20, 21 and 22. Read the full book free as a PDF.
In 1798 Nicolas-Louis Robert, a clerk at a French paper mill, built a moving screen belt that could receive a continuous flow of stock and deliver an unbroken sheet of wet paper to a pair of squeeze rolls, and France granted him a patent for it on 18 January 1799. The machine became practical in England in 1807, when two engineers built an improved version for their employers, the brothers Henry and Sealy Fourdrinier, whose name the machine type still carries. Two years later John Dickinson devised the rival cylinder machine.

The headbox and the wire
At the wet end, the headbox spreads a very dilute slurry across the full width of the machine through a thin adjustable slit called the slice. The jet lands on the wire, a woven plastic mesh running in an endless loop. Foils and vacuum boxes beneath the mesh pull the water down through it while the fibres mat on top. Getting the jet speed to match the wire speed exactly is the quiet art of the whole machine: mismatch it and the sheet forms with a grain that no later stage can fix.
The press section
The web leaving the wire is still mostly water, and it cannot yet bear its own weight, so it travels on felts into the press section. There, nips between massive rolls, some of them drilled or grooved to receive the expressed water, squeeze the sheet like a mangle. Every percentage point of water removed mechanically here saves many times its cost in steam at the dryers, which is why press design is where machine builders spend their cleverness.
Dryers, size and calender
The longest part of the machine is the dryer section: a bank of cast-iron cylinders, each heated inside by steam, with the sheet snaking over and under them in a single endless S-curve, held against the hot surfaces by dryer fabrics. Partway along, a size press can lay a film of starch or pigment on the sheet. At the end, the calender stack, hard polished rolls, presses the surface to its finish, and the reel winds the result into a jumbo roll.
The book walks the machine from wet end to dry end: Paper: Fibre, Web, World, free to read.
Quick answers
Who invented the paper machine?
Nicolas-Louis Robert built a prototype moving screen belt in France in 1798 and was granted a patent on 18 January 1799. An improved version was built in England in 1807 for the Fourdrinier brothers.
What are the main parts of a paper machine?
The headbox, the forming wire, the press section, the dryer cylinders, the size press and calender stack, and the reel at the end.
