Product line · Materials · Paper and Forest Products
Tissue paper manufacturing: how toilet paper is made
Tissue is paper at its most intimate: a very light grade, engineered to be pressed against skin, to fall apart in water on cue, and to feel like cloth while acting like paper.
From the book Paper: Fibre, Web, WorldChapter 31. Read the full book free as a PDF.
A tissue machine is a paper machine shrunk and accelerated. It makes very light sheets at high speeds, and in conventional creped tissue its character comes from one enormous component, the Yankee cylinder. Some tissue is made without creping, by through-air drying, and this page describes the conventional creped process.
Furnish: strength where it matters
Tissue pulp is mostly chemical fibre, chosen for softness and absorbency. The fibres are beaten far less than in printing papers, because tissue wants bulk and softness, not a hard, well-bonded sheet. The slurry is diluted even further than usual and sprayed onto the forming fabric at high speed.
The Yankee cylinder
The heart of the machine is the Yankee dryer: a single steam-heated cylinder with a mirror-polished face. The wet web is pressed against it and dries in one pass, instead of snaking through dozens of small cans as ordinary paper does. Then comes the step that defines conventional creped tissue: a metal doctor blade, the creping doctor, scrapes the dried sheet off the polished face, crumpling it into microscopic folds. Creping is what gives conventional tissue its stretch, its softness and its bulk. The angle and wear of that blade are among the most watched variables in the whole industry.

Through-air drying
Premium tissue skips some of the pressing entirely. In through-air drying, hot air is blown through the web while it is held on a sculpted fabric, so the fibres are barely compacted at all. The result is a thicker, softer, more absorbent sheet at the same weight, which is why the expensive rolls feel like they contain more paper than they do.
Converting: from parent reel to bathroom roll
What comes off the machine is a parent reel metres wide. Converting plants unwind it, laminate two or three plies with embossing rolls that both decorate and bond, perforate the sheets, and rewind everything onto cardboard cores, cut to width, wrapped and packed. Toilet paper is engineered to a contradiction: strong enough on the roll, weak enough in the drain, soft enough for skin and cheap enough to use once. Worldwide, household and sanitary papers made about 39 million tonnes in 2023, and unlike the printing grades, the family keeps growing.
The full chapter on the softest machines is in Paper: Fibre, Web, World, a free Industries of India book.
Quick answers
How is toilet paper made?
In conventional creped tissue, pulp is formed on a fast tissue machine, dried on a steam-heated Yankee cylinder, creped off with a doctor blade for softness, then converted into plied, embossed rolls. Uncreped through-air-dried tissue is an alternative.
What does creping do?
A doctor blade scrapes the dried sheet off the polished cylinder and crumples it into fine folds, which gives tissue its stretch, softness and bulk.
