Cover of The Steam Turbine: Heat, Spin, Current, a book by Ketineni RamaraoFrom the book The Steam Turbine: Heat, Spin, Current
Chapter 7. Read the full book free as a PDF.

The problem with the first trials

Parsons built Turbinia as an experimental vessel in 1894 with the firm of Brown and Hood at Wallsend on Tyne. She was launched on 2 August 1894, light, steel-built and driven by a single turbine on a single propeller. The first trials with one propeller were disappointing.

The cause turned out to be cavitation. A propeller that turns too fast for its size and load pulls vapour bubbles out of the water instead of pushing against it, and the thrust collapses. Parsons researched the problem and built what is described as the first cavitation tunnel. The lesson was that a turbine runs best at high speed, but a propeller does not, so the engine and the propeller had been badly matched.

The fix: three turbines, three shafts, nine propellers

Parsons' answer was to split the power. A reference history says he fitted three axial-flow turbines, a high-pressure, an intermediate-pressure and a low-pressure unit, to three shafts, each carrying three propellers. That is nine propellers sharing the load, so each turned the water more gently at the same total power. The result was a boat that went far faster than anything afloat.

Black and white photograph of a long, low steam launch with a tall flag and a plume of black smoke, throwing a white bow wave as it races across open water.
Turbinia at speed, photographed in 1897 or 1898 by Alfred John West. Parsons's experimental ship was the first to be driven by steam turbines. Photo: Alfred John West, Public domain, via Wikimedia Commons.

Spithead, 26 June 1897

The Navy held a review at Spithead for Queen Victoria's Diamond Jubilee, in front of the Prince of Wales, foreign dignitaries and the Lords of the Admiralty. Turbinia turned up unannounced, as a publicity stunt, and ran between the lines of warships far faster than any of them could go. The ASME landmark record says she travelled at more than 34 knots. A reference page puts her top speed at 34.5 knots, about 64 kilometres an hour.

What happened next

ASME's summary says the demonstration accelerated acceptance of the steam turbine both for ships and for central electric light and power stations. So the stunt mattered beyond the sea: it made the case for the same machine on land. The land story is in how much electricity comes from steam-turbine plants.

What this shows about invention

The turbine itself worked in 1884. What took another thirteen years was the system around it: a propeller that could use the power. Parsons' engineering was not only in the machine but in the diagnosis of why it failed in the water. That is a common pattern, a new engine needs new matching parts, and the matching problem is often harder than the engine. How the machine itself works is covered in how a steam turbine works, and the early history in who invented the steam turbine.

Turbinia is preserved. A reference page records that she was moved to Newcastle's Museum of Science and Engineering on 30 October 1994, a hundred years after her launch, and later redisplayed in the Discovery Museum. The speed figures here come from ASME and a general reference; the exact top speed varies between accounts, which is why the article gives both "over 34 knots" and 34.5.

Quick answers

What was Turbinia?

The first steam turbine-powered ship, built by Charles Parsons in 1894 as an experiment. She was launched on 2 August 1894.

How fast was Turbinia?

ASME says more than 34 knots at the 1897 Spithead review. A reference page gives 34.5 knots, about 64 km/h.

Why did Turbinia's first trials fail?

A single propeller turning at turbine speed suffered cavitation. Parsons built the first cavitation tunnel and moved to three turbines driving three shafts with three propellers each.

When did the Navy adopt steam turbines?

In 1905 the Admiralty moved toward turbine propulsion for its warships, and HMS Dreadnought, the first turbine-powered battleship, followed in 1906.

Sources

Spithead date, launch date, cavitation, three turbines and shafts, 34.5 knots, the 1901 to 1906 sequence and the museum details are from the Turbinia reference page. "More than 34 knots" and the acceleration of acceptance are from ASME. Nine propellers is from the infobox on the reference page (three on each of three shafts).

More from this book

History · From the book The Steam Turbine: Heat, Spin, Current

Who invented the steam turbine? Parsons, de Laval and a toy from Roman Egypt

The steam turbine has an inventor for the modern machine and a very long list of earlier tinkerers.

Process · From the book The Steam Turbine: Heat, Spin, Current

How a steam turbine works: nozzles, blades, stages and a condenser

A steam turbine is a rotor with blades inside a casing.

Economics · From the book The Steam Turbine: Heat, Spin, Current

How much of the world's electricity comes from steam-turbine plants? What the 2024 data shows

No source reviewed gives a single figure for electricity made with steam turbines.

Supply chain · From the book The Steam Turbine: Heat, Spin, Current

Who makes steam turbines, and why heavy forgings have limited supply

A large monoblock steam-turbine rotor shaft is forged from one piece of steel.