Engine design · Industrials · Aerospace and Defense
Turbofan vs turbojet: why airliners moved the thrust to a fan
A turbojet pushes a little air very fast. A turbofan pushes a lot of air a little faster than the aircraft is flying. At airliner speeds, the second is a much better bargain, and that single idea shaped every engine you fly behind.
From the book The Jet Engine: Fire in a Tube, and the End of DistanceChapters 31 and 49. Read the full book free as a PDF.
What changed
A turbojet sends all the air it takes in through the core and out the nozzle. A turbofan puts a large fan at the front, driven by an extra turbine at the back. NASA Glenn explains the result: some of the incoming air goes through the fan and on into the core compressor and burner, and the remainder is moved by the fan alone. Thrust comes from both streams, from the core and from the fan.

The logic
An aircraft is pushed by the reaction to accelerating air. The same thrust can come from a small mass of air thrown back very fast or a large mass thrown back more slowly. The slow, fat stream wastes less energy as fast-moving air left behind in the sky. At subsonic airliner speeds, the exhaust speed of a pure turbojet is far above the speed of the aircraft, which makes it a wasteful way to push a slow aeroplane.
The ratio of the air sent around the core to the air sent through it is the bypass ratio. A higher ratio means more air moved more slowly, which is why modern airliner engines have large fans.

NASA Glenn gives the commercial reason: most modern airliners use turbofans because of their high thrust and good fuel efficiency.
The record for thrust
The scale of the fan is the scale of the engine. GE's GE9X, built for the Boeing 777X, reached 134,300 pounds of thrust in a test, which Guinness World Records certified as the most powerful commercial jet engine, beating the GE90-115B's 127,900 pounds set in 2002. That number is a test-bed maximum, not a normal operating thrust.
The gearbox problem
A big fan wants to turn slowly. The turbine that drives it wants to turn fast. If they are on one shaft, the two speeds have to be a compromise. Pratt & Whitney's answer was a reduction gearbox between them, the geared turbofan. The PW1000G family is estimated to have cost about $10 billion to develop, and the engine entered service in 2016. Wikipedia's summary of trade press reports that at the start of production each engine cost Pratt & Whitney more to build than it sold for, and that less than a third of fan blades passed inspection at the start of 2016. A tainted-powder-metal problem that came to light in 2023 sent many of these engines in for inspection, a reminder that each design gain comes with a new set of risks.
Is the fan getting bigger forever?
Pushing the logic to its limit takes the duct off. An open rotor is a fan without a casing, with swept blades like a propeller. That is still open. Understanding what each component of such an engine does is the place to start, in how a jet engine works.
Quick answers
What is the difference between a turbofan and a turbojet?
A turbojet sends all its air through the core and out the nozzle. A turbofan adds a large front fan that moves extra air around the core, which is more efficient at airliner speeds.
What is bypass ratio?
It is the ratio of the air that goes around the engine core to the air that goes through it. A higher bypass ratio generally means better fuel efficiency at subsonic speeds.
What is the most powerful jet engine?
Guinness World Records certifies the GE9X as the most powerful commercial aircraft jet engine in test, reaching 134,300 pounds of thrust.
Sources
- NASA Glenn Research Center, "Turbofan thrust"
- GE Aerospace press release, "GE9X breaks Guinness World Records title for thrust" (12 July 2019)
- Guinness World Records, most powerful commercial aircraft jet engine (test performance)
- Wikipedia, "Pratt & Whitney PW1000G" (service entry and fleet status)
- GlobalSpec, "PurePower: an advance in aircraft propulsion" (development cost)
- Aviation Week, "Flight Friday: down impact, GTF fleets on the ground" (powder metal issue, 2023)
